MountingHole_4.5mm_Pad_Via
MountingHole
Mounting Hole 4.5mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 9.5 × 9.5 mm
- Pads
- 1
- File
- 3 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Filatov EVD80 MCU PCB | 759 | 524 | 6 | 236 × 150 mm | CC-BY-4.0 | Alexandr-Filatov/EVD80_MCU_PCB ↗ |
| Crush Power Board | 112 | 64 | 4 | 101.6 × 120.65 mm | CC-BY-4.0 | MuddSub/crush-power-board ↗ |
| Chip-8 Console | 72 | 40 | 2 | 166 × 81 mm | CC-BY-4.0 | RICCIARDI-Adrien/Chip8_Console ↗ |
| LED Display G4 Hardware Arena | 35 | 92 | 2 | 171 × 139 mm | CC-BY-4.0 | iorodeo/LED-Display_G4_Hardware_Arena ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception