MountingHole_4mm_Pad
MountingHole
Mounting Hole 4mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 8.5 × 8.5 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Cpu Pub BOARD7 | 553 | 631 | 2 | 150 × 300 mm | CC-BY-4.0 | pottsali/cpu-pub ↗ |
| Rämixx500 | 372 | 471 | 2 | 365.76 × 254 mm | CC-BY-4.0 | SukkoPera/Raemixx500 ↗ |
| OverCycler 3 board | 335 | 410 | 2 | 233.68 × 172.15 mm | CC-BY-4.0 | gligli/overcycler ↗ |
| Commodore Pet Clone | 316 | 390 | 2 | 262.5 × 95.25 mm | CC-BY-4.0 | DLehenbauer/commodore-pet-clone ↗ |
| EconoPET 40/8096 | 299 | 349 | 2 | 262.5 × 95.25 mm | CC-BY-4.0 | DLehenbauer/econopet ↗ |
| EconoPET 40/8096 | 295 | 350 | 2 | 262.5 × 95.25 mm | CC-BY-4.0 | DLehenbauer/econopet ↗ |
| 0.4 | 283 | 234 | 4 | 100 × 100 mm | CC-BY-4.0 | Thrathra/Speeduino-Daytona ↗ |
| MaD BOARD2 | 280 | 243 | 4 | 144.14 × 93.35 mm | CC-BY-4.0 | RileyMcCarthy/MaD ↗ |
| MaD Edge Board | 280 | 243 | 4 | 144.14 × 93.35 mm | CC-BY-4.0 | RileyMcCarthy/MaD-Edge-Board ↗ |
| QOL56 | 180 | 134 | 2 | 272 × 86 mm | CC-BY-4.0 | eswai/QOL56 ↗ |
| Cpu Pub BOARD2 | 179 | 305 | 4 | 150 × 150 mm | CC-BY-4.0 | pottsali/cpu-pub ↗ |
| Rocketry VLAD CanSat | 103 | 101 | 2 | 90 × 80 mm | CC-BY-4.0 | icl-rocketry/VLAD-CanSat ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception