MountingHole_4mm_Pad_TopBottom
MountingHole
Mounting Hole 4mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 8.5 × 8.5 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| OpenJBOD CM4 | 78 | 206 | 4 | 170.21 × 92 mm | CC-BY-4.0 | ApplePie420/OpenJBOD-CM4 ↗ |
| Esp Rcnow | 47 | 51 | 4 | 40 × 70 mm | CC-BY-4.0 | pedrominatel/esp-rcnow ↗ |
| SoulOfBMS BOARD2 | 23 | 79 | 2 | 140 × 60 mm | CC-BY-4.0 | SoulOfNoob/SoulOfBMS ↗ |
| SoulOfBMS BOARD3 | 23 | 79 | 2 | 140 × 60 mm | CC-BY-4.0 | SoulOfNoob/SoulOfBMS ↗ |
| BAJA 2024 2025 Firmware BOARD12 | 13 | 7 | 2 | 82 × 43 mm | CC-BY-4.0 | UofA-BAJA/2024-2025-Firmware ↗ |
| Tektronix 577 2.54P Adapter | 8 | 5 | 2 | 39.37 × 60.96 mm | CC-BY-4.0 | a-tk/parts-files ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception