MountingHole_4mm_Pad_Via
MountingHole
Mounting Hole 4mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 8.5 × 8.5 mm
- Pads
- 1
- File
- 2 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Tangenta | 577 | 1,027 | 4 | 243.84 × 243.84 mm | CC-BY-4.0 | vmetodiev/tangenta ↗ |
| Kicad AMIGA2000 | 558 | 804 | 2 | 416.32 × 345.84 mm | CC-BY-4.0 | madgrizzle/kicad-amiga2000 ↗ |
| Luhb Nvme Carrier For LattePanda Mu | 400 | 630 | 4 | 170.18 × 170.19 mm | CC-BY-4.0 | El-Luhb/nvme-Carrier-for-LattePanda-Mu ↗ |
| Luhb Nvme Carrier For LattePanda Mu BOARD2 | 384 | 581 | 4 | 170.18 × 170.19 mm | CC-BY-4.0 | El-Luhb/nvme-Carrier-for-LattePanda-Mu ↗ |
| Graz FOC Hardware | 328 | 207 | 2 | 120 × 90 mm | CC-BY-4.0 | bobbycar-graz/Bobbycar-FOC-hardware ↗ |
| MuBook | 308 | 418 | 4 | 170.19 × 141.95 mm | CC-BY-4.0 | LtBrain/MuBook ↗ |
| Low Cost Mmwave BOARD2 | 268 | 333 | 6 | 83.81 × 65.15 mm | CC-BY-4.0 | inventor02/low-cost-mmwave ↗ |
| Project NuXT | 223 | 327 | 4 | 184.91 × 243.84 mm | CC-BY-4.0 | monotech/NuXT ↗ |
| Reflow BOARD6 | 214 | 202 | 4 | 80 × 95 mm | CC-BY-4.0 | hackclub/reflow ↗ |
| BD845-PWB PCB | 186 | 141 | 4 | 185 × 110 mm | CC-BY-4.0 | bluedot-arcade/bd845-pwb-board ↗ |
| PGRacingElectronics BOARD12 | 148 | 87 | 4 | 86 × 99 mm | CC-BY-4.0 | patwitt/PGRacingElectronics ↗ |
| WCS1700 Calibrator | 120 | 139 | 4 | 79.56 × 92.53 mm | CC-BY-4.0 | ekatynski/WCS1700-Calibrator ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception