MountingHole_5.5mm
MountingHole
Mounting Hole 5.5mm, no annular, generated by kicad-footprint-generator mountinghole.py
Footprint
0 pads
- Mount
- exclude_from_pos_files
- Courtyard
- 11.5 × 11.5 mm
- Pads
- 0
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| GDI 4ch | 280 | 298 | 4 | 154 × 160 mm | CC-BY-4.0 | tobsec/rusefi-hardware ↗ |
| Powermetering | 200 | 217 | 2 | 194.04 × 114.05 mm | CC-BY-4.0 | Sync-/powermetering ↗ |
| Sf 2023 Facs Automation Pub | 139 | 139 | 4 | 121.2 × 72.05 mm | CC-BY-4.0 | czbiohub-sf/2023-facs-automation-pub ↗ |
| Wren Keyboard BOARD5 | 120 | 67 | 2 | 230.23 × 112.84 mm | CC-BY-4.0 | oliviahanley/wren-keyboard ↗ |
| Wren Keyboard BOARD4 | 120 | 67 | 2 | 230.23 × 112.84 mm | CC-BY-4.0 | oliviahanley/wren-keyboard ↗ |
| Wren Keyboard BOARD6 | 120 | 67 | 2 | 227.65 × 112.84 mm | CC-BY-4.0 | oliviahanley/wren-keyboard ↗ |
| Wren Keyboard BOARD2 | 105 | 67 | 2 | 227.65 × 112.84 mm | CC-BY-4.0 | oliviahanley/wren-keyboard ↗ |
| Io Satellite BOARD11 | 103 | 157 | 2 | 153 × 77 mm | CC-BY-4.0 | inoa-io/satellite ↗ |
| Design68 341-0001 ISO | 102 | 42 | 2 | 301.24 × 91.95 mm | CC-BY-4.0 | demik/oldworld ↗ |
| Design68 341-0001 ANSI | 101 | 43 | 2 | 301.24 × 91.95 mm | CC-BY-4.0 | demik/oldworld ↗ |
| Wren Keyboard | 97 | 62 | 2 | 208.66 × 112.84 mm | CC-BY-4.0 | oliviahanley/wren-keyboard ↗ |
| MIDI Wind Controller BOARD4 | 89 | 65 | 2 | 100 × 160 mm | CC-BY-4.0 | zygurt/MIDI-Wind-Controller ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception