MountingHole_5.5mm_Pad
MountingHole
Mounting Hole 5.5mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 11.5 × 11.5 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| T EQ BOARD2 | 56 | 37 | 4 | 89.3 × 97.14 mm | CC-BY-4.0 | Royalflamejlh/T-EQ ↗ |
| T EQ | 54 | 36 | 2 | 177.8 × 119.89 mm | CC-BY-4.0 | Royalflamejlh/T-EQ ↗ |
| Hc Solder | 10 | 6 | 2 | 60 × 50 mm | CC-BY-4.0 | pybash1/hc-solder ↗ |
| Circuits BOARD14 | 9 | 6 | 2 | 30.01 × 60 mm | CC-BY-4.0 | UCDFS/Circuits ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception