MountingHole_5mm_Pad_Via
MountingHole
Mounting Hole 5mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 10.5 × 10.5 mm
- Pads
- 1
- File
- 2 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Hw Openmower Yardforce | 274 | 326 | 4 | 180 × 170 mm | CC-BY-4.0 | xtech/hw-openmower-yardforce ↗ |
| OpenMower BOARD2 | 177 | 238 | 2 | 180 × 170 mm | CC-BY-4.0 | delhub/OpenMower ↗ |
| OpenMower BOARD3 | 177 | 238 | 2 | 180 × 170 mm | CC-BY-4.0 | arbuckle/OpenMower ↗ |
| OpenMower | 166 | 223 | 2 | 180 × 170 mm | CC-BY-4.0 | niricaco/OpenMower ↗ |
| OpenMower | 166 | 223 | 2 | 180 × 170 mm | CC-BY-4.0 | okritvik/OpenMower ↗ |
| OpenMower | 165 | 223 | 2 | 180 × 170 mm | CC-BY-4.0 | mkelk/OpenMower ↗ |
| PGRacingElectronics BOARD4 | 111 | 191 | 4 | 391.16 × 260.6 mm | CC-BY-4.0 | patwitt/PGRacingElectronics ↗ |
| PGRacingElectronics BOARD2 | 102 | 194 | 4 | 97.28 × 90.3 mm | CC-BY-4.0 | patwitt/PGRacingElectronics ↗ |
| PGRacingElectronics BOARD18 | 90 | 129 | 2 | 99.06 × 73.66 mm | CC-BY-4.0 | patwitt/PGRacingElectronics ↗ |
| Telemetry Back v2.0 | 77 | 94 | 2 | 94.29 × 76.2 mm | CC-BY-4.0 | patwitt/PGRacingElectronics ↗ |
| Pancake Machine | 53 | 63 | 2 | 260 × 80 mm | CC-BY-4.0 | bitbyt3r/pancake_machine ↗ |
| UW GSE Pcb Design Archive BOARD3 | 11 | 6 | 4 | 30.48 × 50.8 mm | CC-BY-4.0 | SARP-UW/GSE_pcb_design_archive ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception