MountingHole_6.5mm
MountingHole
Mounting Hole 6.5mm, no annular, generated by kicad-footprint-generator mountinghole.py
Footprint
0 pads
- Mount
- exclude_from_pos_files
- Courtyard
- 13.5 × 13.5 mm
- Pads
- 0
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| CDS | 223 | 78 | 2 | 406.36 × 158.6 mm | CC-BY-4.0 | Cipulot/CDS ↗ |
| Spud Hardware BOARD19 | 113 | 85 | 4 | 86.31 × 64.6 mm | CC-BY-4.0 | wrig0421/spud-hardware ↗ |
| Spud Hardware BOARD18 | 112 | 76 | 4 | 86.31 × 64.6 mm | CC-BY-4.0 | wrig0421/spud-hardware ↗ |
| KilnController | 82 | 64 | 4 | 163.28 × 389.83 mm | CC-BY-4.0 | Erhannis/KilnController ↗ |
| Project Crumple Zone | 27 | 75 | 2 | 60.7 × 0 mm | CC-BY-4.0 | SamRBetts/Project-Crumple-Zone ↗ |
| Moores ESP32 | 20 | 43 | 2 | 67 × 67 mm | CC-BY-4.0 | madpilot/moores-esp32 ↗ |
| Polygen BOARD3 | 19 | 14 | 2 | 74.75 × 32.65 mm | CC-BY-4.0 | Trikkitt/polygen ↗ |
| Electrical BOARD2 | 10 | 13 | 2 | 109.22 × 121.92 mm | CC-BY-4.0 | Thornbots/Electrical ↗ |
| LADCP Star Board | 10 | 13 | 2 | 48.26 × 88.9 mm | CC-BY-4.0 | pedrolpena/ladcp_interface ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception