MSOP-10_3x3mm_P0.5mm
Package_SO
MSOP, 10 Pin (JEDEC MO-187 variation BA, 0.85mm body thickness, https://www.jedec.org/system/files/docs/mo-187F.pdf)
Footprint
10 pads
- Mount
- Surface mount
- Courtyard
- 6.2 × 3.5 mm
- Pads
- 10
- File
- 5 KB
3D model
STEPPackage_SO_MSOP-10_3x3mm_P0.5mm
4.90 × 3 × 1.10 mm
148 KB STEP
- Library
- Package_SO_MSOP-10_3x3mm
- Model page
- Open →
Parts that use it
24+ components in the catalog place this footprint
CH340E
Interface_USB
USB serial converter, UART, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
Si5351A-B-GT
Oscillator
I2C Programmable Any-Frequency CMOS Clock Generator, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
MCP4728
Analog_DAC
12-bit digital to analog converter, quad output, 2.048V internal reference, integrated EEPROM, I2C interface
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
CH340X
Interface_USB
USB serial converter, 5V-tolerant IO, UART, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
FSUSB42MUX
Interface_USB
Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) or UART Switch, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
MCP73833-xxx-UN
Battery_Management
Stand-Alone Linear Li-Ion / Li-Polymer Charge Management Controller, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
AD9833xRM
Interface
10 bit 25 MHz Programmable Waveform Generator, 2.3V to 5.5V, 12.65mW, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LM5060
Power_Management
High side protection controller, +5.5V to +65V operation, VSSOP-10 package
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
MICRF112YMM
RF
ASK/FSK Transmitter, 1.8-3.6V, 300-450MHz, +10dBm, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
ADG884xRM
Analog_Switch
0.5Ω CMOS, Dual 2:1 MUX/SPDT Audio Switch, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
FSUSB30MUX
Interface_USB
Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
AD5274BRM
Potentiometer_Digital
Digital potentiometer, 256 position, 1% Resistor Tolerance, I2C interface, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
CS2000-CP
Timer_PLL
Fractional-N Clock Synthesizer & Clock Multiplier, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
SSM2167
Amplifier_Audio
Low Voltage Microphone Preamplifier with Variable Compression and Noise Gating, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
AD8213
Amplifier_Current
65V Dual, High Voltage, Current Shunt Monitor, 20V/V gain, bandwidth 500kHz, Vcc=5V, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
AD8475xRMZ
Amplifier_Difference
Precision, Selectable Gain, Fully Differential Funnel Amplifier, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
INA327
Amplifier_Instrumentation
Precision, Rail-to-Rail I/O Instrumentation Amplifier, MSOP-10 package
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
AD40xxBRMZ
Analog_ADC
18-Bit, 2 MSPS/1 MSPS/500 kSPS, Differential SAR ADCs, 2.4V to 5.1V reference, 1.8V supply, 1.71 to 5.5V logic IO, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LTC1865-MS
Analog_ADC
Dual channel 16-bit SAR Analog to Digital Converter, 5V supply, 150ksps, SPI interface
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LTC1865L-MS
Analog_ADC
Dual channel 16-bit SAR Analog to Digital Converter, 3V supply, 150ksps, SPI interface
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
MCP3423x-xUN
Analog_ADC
2-Channel, 18-Bit, Delta-Sigma AD-Converter, I²C Interface, Reference, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
MCP3427x-xUN
Analog_ADC
16-Bit, Multi-Channel ΔΣ Analog-to-Digital Converter with I2C Interface and On-Board Reference, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
AD5691RxRM
Analog_DAC
Tiny, 12-Bit, I2C, nanoDAC+, 2 ppm/°C Reference, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
AD5692RxRM
Analog_DAC
Tiny, 14-Bit, I2C, nanoDAC+, 2 ppm/°C Reference, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Proteus | 1,052 | 373 | 4 | 135 × 82.5 mm | CC-BY-4.0 | mck1117/proteus ↗ |
| Solar PS PowerDistributionUnit BOARD3 | 901 | 431 | 4 | 101.5 × 193 mm | CC-BY-4.0 | lhr-solar/PS-PowerDistributionUnit ↗ |
| I/O MASTER v1 | 674 | 387 | 4 | 170 × 100 mm | CC-BY-4.0 | csinko/io-master ↗ |
| SDR-TRX | 646 | 372 | 4 | 238.35 × 144.71 mm | CC-BY-4.0 | andriy-bilynskyy/sdr-trx ↗ |
| Extracellular Electrophysiology Test Board | 567 | 508 | 4 | 150 × 120 mm | CC-BY-4.0 | open-ephys/ephys-test-board ↗ |
| NerdEKO Gamma | 499 | 327 | 6 | 155.5 × 194.55 mm | CC-BY-4.0 | phil31/NerdEKO-Gamma ↗ |
| Ownverter V1.0 | 474 | 235 | 6 | 100 × 160 mm | CC-BY-4.0 | owntech-foundation/OWNVERTER ↗ |
| Rf Switchboard | 467 | 456 | 4 | 100 × 174.57 mm | CC-BY-4.0 | Erhannis/rf_switchboard ↗ |
| Narrowband SDR | 467 | 284 | 4 | 100 × 100 mm | CC-BY-4.0 | BillyWoods/Narrowband-SDR ↗ |
| Resources Hardware Main BOARD5 | 460 | 554 | 6 | 57.3 × 109 mm | CC-BY-4.0 | bugg-resources/bugg-hardware-main ↗ |
| HackRF One | 458 | 400 | 4 | 120 × 75 mm | CERN-OHL-P-2.0 | GitByKaliMeNope/HackRf-Circuit-Board-KiCad ↗ |
| Resources Hardware Main BOARD4 | 418 | 535 | 6 | 57.3 × 109 mm | CC-BY-4.0 | bugg-resources/bugg-hardware-main ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception