Footprint
9 pads
- Mount
- Surface mount
- Courtyard
- 6.26 × 3.5 mm
- Pads
- 9
- File
- 5 KB
3D model
STEPPackage_SO_MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm
4.90 × 3 × 0.96 mm
114 KB STEP
- Library
- Package_SO_MSOP-8-1EP_3x3mm_P0.65mm
- Model page
- Open →
Parts that use it
9 components in the catalog place this footprint
LTC6229xMS8E
Amplifier_Operational
Low Distortion Rail-to-Rail Output Op Amps with Shutdown, MSOP-8
- Pins
- 9
- Pads
- 9
- SMD
- 6.3×3.5
LTC6269xMS8E
Amplifier_Operational
Dual 500MHz Ultra-Low Bias Current FET Input Op Amps, MSOP-8
- Pins
- 9
- Pads
- 9
- SMD
- 6.3×3.5
LTC4440EMS8
Driver_FET
High-side, N-Channel, Mosfet driver, 80V input, -40°C to +85°C, MSOP-8
- Pins
- 9
- Pads
- 9
- SMD
- 6.3×3.5
LTC4440IMS8
Driver_FET
High-side, N-Channel, Mosfet driver, 80V input, -40°C to +125°C, MSOP-8
- Pins
- 9
- Pads
- 9
- SMD
- 6.3×3.5
LT8580xMS8E
gekkio-Gekkio_Regulator_Switching
Boost/SEPIC/Inverting DC/DC Converter with 1A, 65V Switch, Soft-Start and Synchronization, MSOP-8
- Pins
- 9
- Pads
- 9
- SMD
- 6.3×3.5
LT3010
Regulator_Linear
50mA 3-80V Micropower Low Dropout Regulator, adjustable output, MSOP-8
- Pins
- 9
- Pads
- 9
- SMD
- 6.3×3.5
LT3010-5
Regulator_Linear
50mA 3-80V Micropower Low Dropout Regulator, fixed output 5V, MSOP-8
- Pins
- 9
- Pads
- 9
- SMD
- 6.3×3.5
LT3080xMS8E
Regulator_Linear
Adjustable 1.1A Single Resistor Low Dropout Regulator, MSOP-8
- Pins
- 9
- Pads
- 9
- SMD
- 6.3×3.5
LT3580xMS8E
Regulator_Switching
Boost/Inverting DC/DC Converter with 2A Switch, Soft-Start, and Synchronization, MSOP-8
- Pins
- 9
- Pads
- 9
- SMD
- 6.3×3.5
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Lab Nvm BOARD6 | 238 | 239 | 2 | 175 × 103 mm | CC-BY-4.0 | xuan-lab/nvm ↗ |
| 8ch Currentsource Jlc V3 | 237 | 138 | 4 | 90 × 100 mm | CC-BY-4.0 | saewoonam/8ch_currentsource_jlc_v3 ↗ |
| KICAD PCBs BOARD18 | 104 | 198 | 4 | 110.91 × 143.41 mm | CC-BY-4.0 | raybello/KICAD-PCBs ↗ |
| Game Back Hw | 81 | 49 | 2 | 110 × 55 mm | CC-BY-4.0 | laser-game/back-hw ↗ |
| PicoRX BOARD3 | 80 | 87 | 2 | — | CC-BY-4.0 | MatrixMike/PicoRX ↗ |
| Arduino Weatherstation | 69 | 50 | 2 | 125 × 85 mm | CC-BY-4.0 | AGVOLUTION/arduino_weatherstation ↗ |
| Oshmri BOARD12 | 56 | 64 | 2 | 80.25 × 54 mm | CC-BY-4.0 | kelu124/oshmri ↗ |
| Harp.device.lickety Split BOARD4 | 55 | 68 | 4 | 61.5 × 21 mm | CC-BY-4.0 | AllenNeuralDynamics/harp.device.lickety-split ↗ |
| DSI Sensenet BOARD2 | 48 | 52 | 2 | 35 × 0 mm | CC-BY-4.0 | UVA-DSI/sensenet ↗ |
| GoT Coasters BOARD2 | 41 | 27 | 2 | 44.45 × 0 mm | CC-BY-4.0 | lReddie/GoT_coasters ↗ |
| Kicad NMEA2000 Sensor Pcb Sensor | 38 | 74 | 2 | 100 × 38 mm | MIT | olliiiver/kicad_nmea2000_sensor ↗ |
| Vibration Trigger Pcb Full Circuit | 23 | 15 | 2 | 43.18 × 40.64 mm | Unlicense | joakimsk/vibration-trigger ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception