Symbol
20 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | 1OE | input |
| 2 | 1A0 | input |
| 3 | 2Y0 | tri_state |
| 4 | 1A1 | input |
| 5 | 2Y1 | tri_state |
| 6 | 1A2 | input |
| 7 | 2Y2 | tri_state |
| 8 | 1A3 | input |
| 9 | 2Y3 | tri_state |
| 10 | GND | power_in |
| 11 | 2A3 | input |
| 12 | 1Y3 | tri_state |
| 13 | 2A2 | input |
| 14 | 1Y2 | tri_state |
| 15 | 2A1 | input |
| 16 | 1Y1 | tri_state |
| 17 | 2A0 | input |
| 18 | 1Y0 | tri_state |
| 19 | 2OE | input |
| 20 | VCC | power_in |
On real boards
20+ designs use this part
20 placed it by name in a schematic. Largest first.
- Sukuba Nvmby name
- Misc Computersby name
- Adaptive Peripherals G32 Adaptive Firmware Cardby name
- HEP Opentrigby name
- PC-06 ALU LOGIC UNITby name
- tinyDiskIIby name
- LVDCby name
- CaveBoardby name
- PC-04 ALU Backplaneby name
- I2S Multiplexer - Modular Ampby name
- Atari Jaguar PCBsby name
- PC-01 Dual Register Unitby name
- 486Devby name
- 74HCT6526 Board 3by name
- PC-02 16Bit Register Unitby name
- ZAK180by name
- Pico Pocket386by name
- Afterglow 3.0 Modder's Hatby name
- A2DVI.v2.4by name
- Motor Driverby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed