Symbol
20 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | OE | input |
| 2 | O0 | tri_state |
| 3 | D0 | input |
| 4 | D1 | input |
| 5 | O1 | tri_state |
| 6 | O2 | tri_state |
| 7 | D2 | input |
| 8 | D3 | input |
| 9 | O3 | tri_state |
| 10 | GND | power_in |
| 11 | Cp | input |
| 12 | O4 | tri_state |
| 13 | D4 | input |
| 14 | D5 | input |
| 15 | O5 | tri_state |
| 16 | O6 | tri_state |
| 17 | D6 | input |
| 18 | D7 | input |
| 19 | O7 | tri_state |
| 20 | VCC | power_in |
On real boards
20+ designs use this part
20 placed it by name in a schematic. Largest first.
- IBM PCjrby name
- 01: FDC + Configurationby name
- COCO9511PAKby name
- Adaptive Peripherals G32 Adaptive Firmware Cardby name
- aZ80 Digital I/O & Joystickby name
- Orange Micro Grappler+ Printer Cardby name
- Lbporchby name
- Northstar Advantage Cardsby name
- WolfNet 6502 WBC - Debug Cardby name
- R3 Expansion Boardby name
- Spies Laboratories NicePrint Cardby name
- Prometheus PRT-1 Printer Cardby name
- Apple II I/O RPiby name
- Apple II I/O RPiby name
- Z8C Homebrew Computerby name
- Hoppe UTracer11by name
- Adaptive Peripherals G32 Adaptive Firmware Cardby name
- ProDOS ROM-Driveby name
- ETCExpress Control Surfaceby name
- CGA Schematicsby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed