Symbol
12 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | Pin_1 | passive |
| 2 | Pin_2 | passive |
| 3 | Pin_3 | passive |
| 4 | Pin_4 | passive |
| 5 | Pin_5 | passive |
| 6 | Pin_6 | passive |
| 7 | Pin_7 | passive |
| 8 | Pin_8 | passive |
| 9 | Pin_9 | passive |
| 10 | Pin_10 | passive |
| 11 | Pin_11 | passive |
| 12 | Pin_12 | passive |
On real boards
13 designs use this part
13 placed it by name in a schematic. Largest first.
- Raspberry Pi 3Phase WattMeterby name
- GEMS sensor boardby name
- Open Covg Daq Pcbby name
- PicoWANby name
- PiSwitcher Plus Board - Schematicby name
- LiquorBotby name
- NCNCA Lap Counterby name
- RF unitby name
- SNES & Uzebox Modular Joystick PCBby name
- Thyme after Thyme Connectorsby name
- Two Phase Bipolar Stepper Motorby name
- home2l shades_and_relais - Firmware: winlby name
- Thermocouple Portsby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed