Symbol
2 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | K | passive |
| 2 | A | passive |
On real boards
20+ designs use this part
20 placed it by name in a schematic. Largest first.
- Eu Community Boardsby name
- Apple II - Power Supplyby name
- Dual-button WiFi enabled door bellby name
- Sappire Captainby name
- Rally Bikeby name
- emberOne/00by name
- Fanbeeby name
- MC6847 Video Board for SBC68xxby name
- iCEblinkPicoby name
- RX671 MCRby name
- DC-DC Converter Analog Control System Mk-Iby name
- Oy FNX51by name
- Apple II - Single Piece Keyboardby name
- PowerStream Hardwareby name
- Kicadboardsby name
- Current3x3A Artiqby name
- ThePreampby name
- Apple II - On-Board I/O Part 1by name
- Ampeaterby name
- Robo Rally Onlineby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed