Thermistor_PTC
Device
Temperature dependent resistor, positive temperature coefficient
Symbol
2 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | — | passive |
| 2 | — | passive |
On real boards
20+ designs use this part
20 placed it by name in a schematic. Largest first.
- Dmx Led Barby name
- Gps Trackerby name
- DAB LIDEPotby name
- DAB LIDEPotby name
- FIREFLY2by name
- Digirig Mobileby name
- Iono SmartMeterby name
- RotocasterKULby name
- Colordance Circleby name
- Bosch Dremel GAL 1215 CV Repairby name
- Modular battlemap devboardby name
- Solar Cardby name
- Liv Synth - VCOby name
- AC Entryby name
- Schema elettrico VertiStockby name
- Hydroponics Boardsby name
- Delba Heater Modification Diagramby name
- Hydroponics Boardsby name
- MB02A2 - Power Supply Moduleby name
- Supercapacitor bank inputby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed