LT8391xFE
Driver_LED
60V Synchronous 4-Switch Buck-Boost LED Controller, TSSOP-28
Symbol
29 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
29 pads
- Library
- Package_SO
- Mount
- smd
- Courtyard
- 7.7 × 10.2 mm
- Link
- exact
- Footprint page
- Open →
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | BG1 | output | 1 |
| 2 | BST1 | passive | 2 |
| 3 | SW1 | passive | 3 |
| 4 | TG1 | output | 4 |
| 5 | LSP | input | 5 |
| 6 | LSN | input | 6 |
| 7 | VIN | power_in | 7 |
| 8 | INTVCC | power_out | 8 |
| 9 | EN/UVLO | input | 9 |
| 10 | RP | input | 10 |
| 11 | PWM | input | 11 |
| 12 | VREF | power_out | 12 |
| 13 | CTRL1 | input | 13 |
| 14 | ISP | input | 14 |
| 15 | ISN | input | 15 |
| 16 | CTRL2 | input | 16 |
| 17 | ~{FAULT} | open_collector | 17 |
| 18 | SS | passive | 18 |
| 19 | FB | input | 19 |
| 20 | VC | passive | 20 |
| 21 | RT | passive | 21 |
| 22 | SYNC/SPRD | input | 22 |
| 23 | PWMTG | output | 23 |
| 24 | VOUT | power_in | 24 |
| 25 | TG2 | output | 25 |
| 26 | SW2 | passive | 26 |
| 27 | BST2 | passive | 27 |
| 28 | BG2 | output | 28 |
| 29 | GND | power_in | 29 |
On real boards
3 designs use this part
3 placed it by name in a schematic. Largest first.
- PD Chargerby name
- PD Chargerby name
- PD Chargerby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed