L297

Driver_Motor

Stepper Motor Controller, DIP-20/SO-20

Symbol

20 pins

Schematic symbol for L297

Units: 1
Kind: part
Grid: on 1.27 mm

Footprint

none

no footprint linked

This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.

3D model

none

no 3D model

The footprint references no model, or the referenced model is not in the upstream package set.

Pins and pads

No footprint is linked, so there is nothing to cross-check.

Pin	Name	Type
1	SYNC	bidirectional
2	GND	power_in
3	HOME	open_collector
4	A	output
5	INH1	output
6	B	output
7	C	output
8	INH2	output
9	D	output
10	ENABLE	input
11	CONTROL	input
12	Vs	power_in
13	SENS2	input
14	SENS1	input
15	Vref	input
16	OSC	input
17	CW	input
18	CLOCK	input
19	HALF	input
20	RESET	input

On real boards

3 designs use this part

3 placed it by name in a schematic. Largest first.

Two Phase Bipolar Stepper MotorSchematic · 21 parts · 1 sheetby name
21 Waste Management And Sorting Autonomous S 50bf84Schematic · 9 parts · 1 sheetby name
21 Waste Sorting And Management Autonomous SystemSchematic · 9 parts · 1 sheetby name

Provenance

Source: kicad-symbols
Credit: KiCad Libraries Contributors
Licence: CC-BY-SA-4.0-with-KiCad-exception
Link method: none
Cross-check: not confirmed