TMC2202-WA
Driver_Motor
Standalone driver for two-phase bipolar stepper motor, 2A, 4.75… 36V, UART, internal FETs, QFN32
Symbol
32 pins- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
33 pads- Library
- Package_DFN_QFN
- Mount
- smd
- Courtyard
- 6.2 × 6.2 mm
- Link
- exact
- Footprint page
- Open →
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | OB2 | output | 1 |
| 2 | NC | no_connect | 2 |
| 3 | VS | power_in | 3 |
| 4 | NC | no_connect | 4 |
| 5 | ENN | input | 5 |
| 6 | GND | power_in | 6 |
| 7 | CPO | passive | 7 |
| 8 | CPI | passive | 8 |
| 9 | VCP | passive | 9 |
| 10 | 5VOUT | power_out | 10 |
| 11 | MS1 | input | 11 |
| 12 | MS2 | input | 12 |
| 13 | DIAG | output | 13 |
| 14 | CLK | input | 14 |
| 15 | PDN_UART | bidirectional | 15 |
| 16 | VCC_IO | power_in | 16 |
| 17 | STEP | input | 17 |
| 18 | VREF | input | 18 |
| 19 | GND | passive | 19 |
| 20 | DIR | input | 20 |
| 21 | NC | no_connect | 21 |
| 22 | VS | passive | 22 |
| 23 | NC | no_connect | 23 |
| 24 | OA2 | output | 24 |
| 25 | BRA | passive | 25 |
| 26 | NC | no_connect | 26 |
| 27 | OA1 | output | 27 |
| 28 | NC | no_connect | 28 |
| 29 | NC | no_connect | 29 |
| 30 | OB1 | output | 30 |
| 31 | NC | no_connect | 31 |
| 32 | BRB | passive | 32 |
On real boards
1 design use this part
1 carries its footprint on a board, and no other part in the catalog uses that footprint. Largest first.
- Lichtstabby footprint
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed
What the linker recorded
- 1 pad(s) with no matching symbol pin (thermal/mechanical): 33
