JoyWarrior24A10L
Interface_HID
JoyWarrior 10bit, 3 axis, joystick controller, DIP-24/SOIC-24
Symbol
24 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | X0/B0 | input |
| 2 | X1/B1 | input |
| 3 | X2/B2 | input |
| 4 | X3/B3 | input |
| 5 | ~{CS} | output |
| 6 | Din | input |
| 7 | Aux0 | output |
| 8 | Aux2 | output |
| 9 | GND | power_in |
| 10 | PullToGnd | input |
| 11 | VREG | power_out |
| 12 | Direct | input |
| 13 | NC | no_connect |
| 14 | VCC | power_in |
| 15 | D- | bidirectional |
| 16 | D+ | bidirectional |
| 17 | Aux3 | output |
| 18 | Aux1 | output |
| 19 | Dout | output |
| 20 | SCLK | output |
| 21 | Y3/B7 | input |
| 22 | Y2/B6 | input |
| 23 | Y1/B5 | input |
| 24 | Y0/B4 | input |
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed