MAX489E
Interface_UART
Full duplex RS-485/RS-422, 0.25 Mbps, ±15kV electro-static discharge (ESD) protection, slew-rate limited, no low-power shutdown, with with receiver/driver enable, 32 receiver drive capability, 0 to +70 degree Celsius, DIP-14 and SOIC-14
Symbol
14 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | NC | no_connect |
| 2 | RO | output |
| 3 | ~{RE} | input |
| 4 | DE | input |
| 5 | DI | input |
| 6 | GND | power_in |
| 7 | GND | passive |
| 8 | NC | no_connect |
| 9 | Y | output |
| 10 | Z | output |
| 11 | B | input |
| 12 | A | input |
| 13 | NC | no_connect |
| 14 | VCC | power_in |
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed