Symbol
30 pins- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
30 pads- Library
- Module
- Mount
- through_hole
- Courtyard
- 75.43 × 53.84 mm
- Link
- exact
- Footprint page
- Open →
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | NC | no_connect | 1 |
| 2 | IOREF | output | 2 |
| 3 | ~{RESET} | input | 3 |
| 4 | 3V3 | power_out | 4 |
| 5 | +5V | power_out | 5 |
| 6 | GND | power_in | 6 |
| 7 | GND | power_in | 7 |
| 8 | VIN | power_in | 8 |
| 9 | A0 | bidirectional | 9 |
| 10 | A1 | bidirectional | 10 |
| 11 | A2 | bidirectional | 11 |
| 12 | A3 | bidirectional | 12 |
| 13 | SDA/A4 | bidirectional | 13 |
| 14 | SCL/A5 | bidirectional | 14 |
| 15 | D0/RX | bidirectional | 15 |
| 16 | D1/TX | bidirectional | 16 |
| 17 | D2 | bidirectional | 17 |
| 18 | D3 | bidirectional | 18 |
| 19 | D4 | bidirectional | 19 |
| 20 | D5 | bidirectional | 20 |
| 21 | D6 | bidirectional | 21 |
| 22 | D7 | bidirectional | 22 |
| 23 | D8 | bidirectional | 23 |
| 24 | D9 | bidirectional | 24 |
| 25 | D10 | bidirectional | 25 |
| 26 | D11 | bidirectional | 26 |
| 27 | D12 | bidirectional | 27 |
| 28 | D13 | bidirectional | 28 |
| 29 | GND | power_in | 29 |
| 30 | AREF | input | 30 |
On real boards
20+ designs use this part
13 placed it by name in a schematic; 7 carry its footprint on a board, and no other part in the catalog uses that footprint. Largest first.
- ME210 FinalProjectby name
- Battery Charger From Wind Turbineby name
- Projectweek 2021 Project Repository Turbineboostersby footprint
- Projectweek 2021 Project Repository Turbineboostersby name
- Uraniaby name
- Arduino Shieldby name
- Nhat Tuan Minh NguyenNhatTuanMinh 2151229 ESD E1by footprint
- Student 2151065 ESD E1 Chu Thanh Dong BOARD2by footprint
- Student 2151065 ESD E1 Chu Thanh Dongby footprint
- Nguy N Nh T Khanh 2151097 ESD E1by footprint
- Arduino Uno Pet Pullerby footprint
- Arduino Uno Pet Pullerby name
- NgoNgocDaiViet 2151163 ESD E1by footprint
- AutonomousTrikeby name
- Student 2151065 ESD E1 Chu Thanh Dongby name
- ARDUINO SHIELDby name
- ARDUINO UNO SHIELDby name
- ARDUINO UNO SHIELDby name
- PhantomMotorcontrolerby name
- PedestrianSenseby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed
