DW1000
RF
Ultra Wideband transceiver, 6.8Mbps data rates, 3.5GHz to 6.5GHz, QFN-48
Symbol
49 pins- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
49 pads- Library
- Package_DFN_QFN
- Mount
- smd
- Courtyard
- 7.26 × 7.26 mm
- Link
- exact
- Footprint page
- Open →
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | NC | no_connect | 1 |
| 2 | NC | no_connect | 2 |
| 3 | EXTCLK/XTAL1 | input | 3 |
| 4 | XTAL2 | input | 4 |
| 5 | VREF | bidirectional | 5 |
| 6 | VDDMS | power_out | 6 |
| 7 | VDDIF | power_out | 7 |
| 8 | CLKTUNE | bidirectional | 8 |
| 9 | VDDCLK | power_out | 9 |
| 10 | VDDSYN | power_out | 10 |
| 11 | VDDVCO | power_out | 11 |
| 12 | VCOTUNE | bidirectional | 12 |
| 13 | NC | no_connect | 13 |
| 14 | NC | no_connect | 14 |
| 15 | VDDLNA | power_in | 15 |
| 16 | RF_P | bidirectional | 16 |
| 17 | RF_N | bidirectional | 17 |
| 18 | VDDPA1 | power_in | 18 |
| 19 | VDDPA2 | power_in | 19 |
| 20 | VDDREG | power_out | 20 |
| 21 | EXTON | output | 21 |
| 22 | FORCEON | input | 22 |
| 23 | WAKEUP | input | 23 |
| 24 | ~{SPICS} | input | 24 |
| 25 | VDDAON | power_in | 25 |
| 26 | VDDLDOD | power_in | 26 |
| 27 | ~{RST} | bidirectional | 27 |
| 28 | VDDIOA | power_in | 28 |
| 29 | SYNC/GPIO7 | bidirectional | 29 |
| 30 | GPIO6/EXTRXE/SPIPHA | bidirectional | 30 |
| 31 | VDDIO | power_out | 31 |
| 32 | VSSIO | power_in | 32 |
| 33 | GPIO5/EXTTXE/SPIPOL | bidirectional | 33 |
| 34 | GPIO4/EXTPA | bidirectional | 34 |
| 35 | GPIO3/TXLED | bidirectional | 35 |
| 36 | GPIO2/RXLED | bidirectional | 36 |
| 37 | GPIO1/SFDLED | bidirectional | 37 |
| 38 | GPIO0/RXOKLED | bidirectional | 38 |
| 39 | SPIMOSI | input | 39 |
| 40 | SPIMISO | output | 40 |
| 41 | SPICLK | input | 41 |
| 42 | VDDIO | power_out | 42 |
| 43 | VSSIO | passive | 43 |
| 44 | VDDDIG | power_out | 44 |
| 45 | IRQ/GPIO8 | bidirectional | 45 |
| 46 | TESTMODE | input | 46 |
| 47 | VDDBATT | power_in | 47 |
| 48 | VDDLDOA | power_in | 48 |
| 49 | GND | power_in | 49 |
On real boards
20+ designs use this part
20 carry its footprint on a board, and no other part in the catalog uses that footprint. Largest first.
- Raspberrypi Io Boardby footprint
- UnluckyLamiaKeyboardby footprint
- Frooastboard BOARD2by footprint
- ATOM47by footprint
- ATOM47 BOARD3by footprint
- ZX Sizif-512-extby footprint
- ZX Sizif-512-extby footprint
- Embedded HSLink Hardwareby footprint
- HSDevKit5301by footprint
- BB3 CM4by footprint
- Embedded HSLink Hardware BOARD5by footprint
- Embedded HSLink Hardware BOARD4by footprint
- Marie OtterControlNG BOARD2by footprint
- Embedded HSLink Hardware BOARD3by footprint
- RTB C12 Moduleby footprint
- Potatoby footprint
- Embedded HSLink Hardware BOARD2by footprint
- Frooastboardby footprint
- BNUY ROM BOARD5by footprint
- Rectification Column Driver With Remote Communication BOARD3by footprint
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed
