Symbol
20 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
20 pads
- Library
- RF_GPS
- Mount
- smd
- Courtyard
- 16 × 16 mm
- Link
- exact
- Footprint page
- Open →
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | GND | power_in | 1 |
| 2 | VCC_IO | power_in | 2 |
| 3 | V_BCKP | power_in | 3 |
| 4 | GND | passive | 4 |
| 5 | GND | passive | 5 |
| 6 | GND | passive | 6 |
| 7 | TIMEPULSE | output | 7 |
| 8 | ~{SAFEBOOT} | input | 8 |
| 9 | SDA | bidirectional | 9 |
| 10 | GND | passive | 10 |
| 11 | GND | passive | 11 |
| 12 | SCL | input | 12 |
| 13 | TXD | output | 13 |
| 14 | RXD | input | 14 |
| 15 | GND | passive | 15 |
| 16 | GND | passive | 16 |
| 17 | VCC | power_in | 17 |
| 18 | ~{RESET} | input | 18 |
| 19 | EXTINT | input | 19 |
| 20 | GND | passive | 20 |
On real boards
20+ designs use this part
7 placed it by name in a schematic; 13 carry its footprint on a board, and no other part in the catalog uses that footprint. Largest first.
- GHOULby footprint
- X Aetherby footprint
- Guesserby footprint
- Pointerby footprint
- UNHSEDS BOARD3by footprint
- UNHSEDSby footprint
- Io Flight Computerby name
- Rocketry Flight Computerby footprint
- SPT Altimeterby name
- SPT Altimeterby footprint
- Balloon Sat Trackerby footprint
- Raspberry Pi Zero Flight Controllerby footprint
- GHOULby name
- Sensorsby name
- Njit GPSTracker430by name
- Kleinvoetby footprint
- Njit GPSTracker430 BOARD2by footprint
- Guesserby name
- Sensorsby name
- Offlineby footprint
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed