Symbol
34 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
34 pads
- Library
- RF_Module
- Mount
- smd
- Courtyard
- 21.88 × 26.63 mm
- Link
- exact
- Footprint page
- Open →
3D model
STEPRF_Module_DecaWave_DWM1001
19.13 × 26.12 × 3.21 mm
698 KB STEP
- Library
- RF_Module_DecaWave
- Link
- exact
- Model page
- Open →
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | GND | power_in | 1 |
| 2 | SWD_CLK | input | 2 |
| 3 | SWD_DIO | bidirectional | 3 |
| 4 | GPIO_10 | bidirectional | 4 |
| 5 | GPIO_9 | bidirectional | 5 |
| 6 | GPIO_12 | bidirectional | 6 |
| 7 | GPIO_14 | bidirectional | 7 |
| 8 | GPIO_22 | bidirectional | 8 |
| 9 | GPIO_31 | bidirectional | 9 |
| 10 | GPIO_30 | bidirectional | 10 |
| 11 | GND | passive | 11 |
| 12 | VCC | power_in | 12 |
| 13 | GPIO_27 | bidirectional | 13 |
| 14 | I2C_SDA | bidirectional | 14 |
| 15 | I2C_SCL | output | 15 |
| 16 | GPIO_23 | bidirectional | 16 |
| 17 | GPIO_13 | bidirectional | 17 |
| 18 | UART_RX | input | 18 |
| 19 | READY | output | 19 |
| 20 | UART_TX | output | 20 |
| 21 | GPIO_1 | bidirectional | 21 |
| 22 | GPIO_0 | bidirectional | 22 |
| 23 | GPIO_15 | bidirectional | 23 |
| 24 | GND | passive | 24 |
| 25 | GPIO_8 | bidirectional | 25 |
| 26 | SPIS_MISO | output | 26 |
| 27 | SPIS_MOSI | tri_state | 27 |
| 28 | SPIS_CLK | input | 28 |
| 29 | ~{SPIS_CS} | input | 29 |
| 30 | GPIO_3 | bidirectional | 30 |
| 31 | GPIO_2 | bidirectional | 31 |
| 32 | BT_WAKE_UP | input | 32 |
| 33 | ~{RESET} | input | 33 |
| 34 | GND | passive | 34 |
On real boards
1 design use this part
1 carries its footprint on a board, and no other part in the catalog uses that footprint. Largest first.
- Leaf BOARD3by footprint
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed