RFM69HCW
RF_Module
Low power ISM Radio Transceiver Module, SPI interface, AES encryption, 434 or 915 MHz, up to 100mW, up to 300 kb/s, SMD-16, DIP-16
Symbol
16 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
- Extends
- RFM95W-868S2
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | GND | power_in |
| 2 | MISO | output |
| 3 | MOSI | input |
| 4 | SCK | input |
| 5 | NSS | input |
| 6 | RESET | bidirectional |
| 7 | DIO5 | bidirectional |
| 8 | GND | power_in |
| 9 | ANT | bidirectional |
| 10 | GND | power_in |
| 11 | DIO3 | bidirectional |
| 12 | DIO4 | bidirectional |
| 13 | 3.3V | power_in |
| 14 | DIO0 | bidirectional |
| 15 | DIO1 | bidirectional |
| 16 | DIO2 | bidirectional |
On real boards
7 designs use this part
7 placed it by name in a schematic. Largest first.
- NodeAlarmby name
- Pathak Thrustby name
- WISDOM Node Hardwareby name
- Watchby name
- Pico Xpadby name
- Lightlink Remote Outletby name
- ROASTby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed