LTC3892-1
Regulator_Controller
60V dual 2-phase synchronous step-down DC/DC controller, forced continuous conduction mode, TSSOP-28
Symbol
29 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
29 pads
- Library
- Package_SO
- Mount
- smd
- Courtyard
- 7.7 × 10.2 mm
- Link
- exact
- Footprint page
- Open →
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | ITH1 | passive | 1 |
| 2 | VFB1 | input | 2 |
| 3 | SENSE1+ | input | 3 |
| 4 | SENSE1- | input | 4 |
| 5 | FREQ | input | 5 |
| 6 | PLLIN/MODE | input | 6 |
| 7 | INTVcc | power_out | 7 |
| 8 | RUN1 | input | 8 |
| 9 | RUN2 | input | 9 |
| 10 | SENSE2- | input | 10 |
| 11 | SENSE2+ | input | 11 |
| 12 | VFB2 | input | 12 |
| 13 | ITH2 | passive | 13 |
| 14 | DRVUV | input | 14 |
| 15 | DRVSET | input | 15 |
| 16 | TRACK/SS2 | input | 16 |
| 17 | TG2 | output | 17 |
| 18 | SW2 | output | 18 |
| 19 | BOOST2 | output | 19 |
| 20 | BG2 | output | 20 |
| 21 | DRVcc | power_out | 21 |
| 22 | EXTVcc | power_in | 22 |
| 23 | Vin | power_in | 23 |
| 24 | BG1 | output | 24 |
| 25 | BOOST1 | output | 25 |
| 26 | SW1 | output | 26 |
| 27 | TG1 | output | 27 |
| 28 | TRACK/SS1 | input | 28 |
| 29 | GND | power_in | 29 |
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed