SHTC3
Sensor_Humidity
Humidity and Temperature Sensor, ±2%RH, ±0.2°C, I2C, 1.62-3.6V, DFN-4
Symbol
5 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
- Extends
- SHTC1
Footprint
5 pads
- Library
- Sensor_Humidity
- Mount
- smd
- Courtyard
- 2.9 × 2.5 mm
- Link
- exact
- Footprint page
- Open →
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | VDD | power_in | 1 |
| 2 | SCL | input | 2 |
| 3 | SDA | bidirectional | 3 |
| 4 | VSS | power_in | 4 |
| 5 | NC | no_connect | 5 |
On real boards
20+ designs use this part
16 placed it by name in a schematic; 4 carry its footprint on a board, and no other part in the catalog uses that footprint. Largest first.
- Twig Temp/humidity sensorby footprint
- Kwartzlab Environmental Sensorby footprint
- BLESEN BOARD2by footprint
- BLESEN BOARD5by footprint
- Space Experimenta LoraNodeby name
- AVTokyo 2022 smart badgeby name
- ESPHomeGarageDoorOpenerby name
- Weather Station Main Boardby name
- demo-driversby name
- STM32-Ambient-Sensor - BLESENby name
- Door Sensorby name
- Room133 KiCADby name
- Iot Home Automation Hwby name
- b-parasiteby name
- b-parasiteby name
- ESPHomeGarageDoorOpenerby name
- LoRa133 KiCADby name
- CM5 MINIMAby name
- CM5 MINIMAby name
- T RH LUX Sensor Boardby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed