LSM6DS3
Sensor_Motion
I2C/SPI, iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope
Symbol
14 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
14 pads
- Library
- Package_LGA
- Mount
- smd
- Courtyard
- 3.5 × 3 mm
- Link
- exact
- Footprint page
- Open →
3D model
STEPPackage_LGA_LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y
3 × 2.50 × 0.78 mm
118 KB STEP
- Library
- Package_LGA_LGA-14_3x2.5mm_P0.5mm
- Link
- exact
- Model page
- Open →
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | SDO/SA0 | bidirectional | 1 |
| 2 | SDX | bidirectional | 2 |
| 3 | SCX | input | 3 |
| 4 | INT1 | output | 4 |
| 5 | VDDIO | power_in | 5 |
| 6 | GND | power_in | 6 |
| 7 | GND | passive | 7 |
| 8 | VDD | power_in | 8 |
| 9 | INT2 | output | 9 |
| 10 | NC | no_connect | 10 |
| 11 | NC | no_connect | 11 |
| 12 | CS | input | 12 |
| 13 | SCL | input | 13 |
| 14 | SDA | bidirectional | 14 |
On real boards
20+ designs use this part
20 placed it by name in a schematic. Largest first.
- AnyShake Explorerby name
- Странный кубикby name
- Kp Ledsuitby name
- Quectowatchby name
- crossometer miniby name
- Epaper Smart Watchby name
- JWatchby name
- MSL Imperial 2023by name
- uMyoby name
- Tornadoby name
- Jazzhands Hardwareby name
- Quadby name
- Robot Controllerby name
- RoboBuddyby name
- MonC Drone Simluationby name
- Prototrollerby name
- OPEN ECU : CAN & Fingerprint IDby name
- Cycling Cadence Sensorby name
- ESP32 Watchdogby name
- Gamebubby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed