SW_Push_Dual_x2
Switch
Push button switch, generic, separate symbols, four pins
Symbol
4 pins
- Units
- 2
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | C | passive |
| 2 | D | passive |
| 3 | C | passive |
| 4 | D | passive |
On real boards
20+ designs use this part
20 placed it by name in a schematic. Largest first.
- A500 Keyboardby name
- IR Interruption Detectorby name
- Kella V1.0by name
- Desk Displayby name
- RFby name
- Miscellaneousby name
- QPS Driver Circuitby name
- Beaverby name
- Genboxby name
- ECEN4024 SAM Automationby name
- Sn ESP32 IOT Boardby name
- TVC FlightControllerby name
- ESP32 CLOCKby name
- ECEN4024 SAM Automationby name
- ArchiNETby name
- De Anca Periferico Teclado Ratonby name
- Verilog FPGA Programming Projectsby name
- ECE270by name
- Epaper Schematicby name
- Epaper Schematicby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed