SW_Push_Open
Switch
Push button switch, push-to-open, generic, two pins
Symbol
2 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | A | passive |
| 2 | B | passive |
On real boards
20+ designs use this part
20 placed it by name in a schematic. Largest first.
- Dyson V6 BMS - PCB 61462by name
- Dyson V7 BMS - PCB 279857by name
- Can ESP32by name
- JewelLED/LuxAura Earringby name
- KICAD Onboarding Devboardby name
- Power Connector & Miscby name
- Drone Visionby name
- Game Controller Interface for RC2014by name
- Lift Motor Controller with temperature sensorsby name
- EZS Q - Universal moduleby name
- A Fa Schematicsby name
- Q KEYby name
- RockSatX GHOST Hardwareby name
- PSoC (Processing Unit)by name
- TAIWO TDby name
- I Protectby name
- Drone Uwbby name
- CDFR2026 Pamisby name
- Q PIRby name
- Ep CUTE Power Sysby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed