ST3232
agg-agg-kicad
Symbol
16 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | C1+ | passive |
| 2 | V+ | power_out |
| 3 | C1- | passive |
| 4 | C2+ | passive |
| 5 | C2- | passive |
| 6 | V- | power_out |
| 7 | T2OUT | output |
| 8 | R2IN | input |
| 9 | R2OUT | output |
| 10 | T2IN | input |
| 11 | T1IN | input |
| 12 | R1OUT | output |
| 13 | R1IN | input |
| 14 | T1OUT | output |
| 15 | GND | power_in |
| 16 | VCC | power_in |
Provenance
- Source
- agg-symbols
- Credit
- Adam Greig
- Licence
- MIT
- Link method
- name_only
- Cross-check
- not confirmed
What the linker recorded
- reference names library 'agg', which does not hold 'TSSOP-16'; the only library that does is 'agg-agg' — suggested, not confirmed