ESP32-S3-WROOM-1
espressif-Espressif
2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna
Symbol
41 pins- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | GND | power_in |
| 2 | 3V3 | power_in |
| 3 | EN | input |
| 4 | GPIO4/TOUCH4/ADC1_CH3 | bidirectional |
| 5 | GPIO5/TOUCH5/ADC1_CH4 | bidirectional |
| 6 | GPIO6/TOUCH6/ADC1_CH5 | bidirectional |
| 7 | GPIO7/TOUCH7/ADC1_CH6 | bidirectional |
| 8 | GPIO15/U0RTS/ADC2_CH4/XTAL_32K_P | bidirectional |
| 9 | GPIO16/U0CTS/ADC2_CH5/XTAL_32K_N | bidirectional |
| 10 | GPIO17/U1TXD/ADC2_CH6 | bidirectional |
| 11 | GPIO18/U1RXD/ADC2_CH7/CLK_OUT3 | bidirectional |
| 12 | GPIO8/TOUCH8/ADC1_CH7/SUBSPICS1 | bidirectional |
| 13 | GPIO19/U1RTS/ADC2_CH8/CLK_OUT2/USB_D- | bidirectional |
| 14 | GPIO20/U1CTS/ADC2_CH9/CLK_OUT1/USB_D+ | bidirectional |
| 15 | GPIO3/TOUCH3/ADC1_CH2 | bidirectional |
| 16 | GPIO46 | bidirectional |
| 17 | GPIO9/TOUCH9/ADC1_CH8/FSPIHD/SUBSPIHD | bidirectional |
| 18 | GPIO10/TOUCH10/ADC1_CH9/FSPICS0/FSPIIO4/SUBSPICS0 | bidirectional |
| 19 | GPIO11/TOUCH11/ADC2_CH0/FSPID/FSPIIO5/SUBSPID | bidirectional |
| 20 | GPIO12/TOUCH12/ADC2_CH1/FSPICLK/FSPIIO6/SUBSPICLK | bidirectional |
| 21 | GPIO13/TOUCH13/ADC2_CH2/FSPIQ/FSPIIO7/SUBSPIQ | bidirectional |
| 22 | GPIO14/TOUCH14/ADC2_CH3/FSPIWP/FSPIDQS/SUBSPIWP | bidirectional |
| 23 | GPIO21 | bidirectional |
| 24 | GPIO47/SPICLK_P/SUBSPICLK_P_DIFF | bidirectional |
| 25 | GPIO48/SPICLK_N/SUBSPICLK_N_DIFF | bidirectional |
| 26 | GPIO45 | bidirectional |
| 27 | GPIO0/BOOT | bidirectional |
| 28 | SPIIO6/GPIO35/FSPID/SUBSPID | bidirectional |
| 29 | SPIIO7/GPIO36/FSPICLK/SUBSPICLK | bidirectional |
| 30 | SPIDQS/GPIO37/FSPIQ/SUBSPIQ | bidirectional |
| 31 | GPIO38/FSPIWP/SUBSPIWP | bidirectional |
| 32 | MTCK/GPIO39/CLK_OUT3/SUBSPICS1 | bidirectional |
| 33 | MTDO/GPIO40/CLK_OUT2 | bidirectional |
| 34 | MTDI/GPIO41/CLK_OUT1 | bidirectional |
| 35 | MTMS/GPIO42 | bidirectional |
| 36 | U0RXD/GPIO44/CLK_OUT2 | bidirectional |
| 37 | U0TXD/GPIO43/CLK_OUT1 | bidirectional |
| 38 | GPIO2/TOUCH2/ADC1_CH1 | bidirectional |
| 39 | GPIO1/TOUCH1/ADC1_CH0 | bidirectional |
| 40 | GND | passive |
| 41 | GND | passive |
Provenance
- Source
- espressif-symbols
- Credit
- Espressif Systems
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- ambiguous
- Cross-check
- not confirmed
What the linker recorded
- 3 libraries hold a footprint named 'ESP32-S3-WROOM-1' and none of them is 'PCM_Espressif'
