Sensor, BME280
jlcpcb-JLCPCB-Extended
3-in-1 sensor, humidity, pressure, temperature, I2C and SPI interface, 1.71-3.6V, LGA-8
Symbol
8 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | GND | power_in |
| 2 | CSB | input |
| 3 | SDA/SDI | bidirectional |
| 4 | SCL/SCK | input |
| 5 | SDO | bidirectional |
| 6 | VDDIO | power_in |
| 7 | GND | power_in |
| 8 | VDD | power_in |
Provenance
- Source
- jlcpcb-symbols
- Credit
- Chris Dirks (CDFER) and contributors
- Licence
- MIT
- Link method
- ambiguous
- Cross-check
- not confirmed
What the linker recorded
- 2 libraries hold a footprint named 'Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering' and none of them is 'PCM_JLCPCB'