Components
3,423 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
Conn_ARM_SWD_TagConnect_TC2030-NL
Connector
Tag-Connect ARM Cortex SWD JTAG connector, 6 pin, no legs
- Pins
- 6
- Pads
- 6
- Mount
- 7.0×4.0
Arduino_Nano_v3.x
MCU_Module
Arduino Nano v3.x
- Pins
- 30
- Pads
- 30
- THT
- 18.3×46.2
MPU-6050
Sensor_Motion
InvenSense 6-Axis Motion Sensor, Gyroscope, Accelerometer, I2C
- Pins
- 24
- Pads
- 24
- SMD
- 5.3×5.3
Arduino_UNO_R3
MCU_Module
Arduino UNO Microcontroller Module, release 3
- Pins
- 32
- Pads
- 32
- THT
- 75.4×53.8
L298N
Driver_Motor
Dual full bridge motor driver, up to 46V, 4A, Multiwatt15-V
- Pins
- 15
- Pads
- 15
- THT
- 20.7×11.0
ESP32-WROOM-32D
RF_Module
RF Module, ESP32-D0WD SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD
- Pins
- 39
- Pads
- 39
- SMD
- 48.5×41.5
TP4056-42-ESOP8
Battery_Management
1A Standalone Linear Li-ion/LiPo single-cell battery charger, 4.2V ±1% charge voltage, VCC = 4.0..8.0V, SOIC-8 (SOP-8)
- Pins
- 9
- Pads
- 9
- SMD
- 7.4×5.4
Bus_PCI_Express_x8
Connector
PCI Express bus connector x8
- Pins
- 98
- Pads
- 98
- Mount
- 52.3×9.4
Conn_ARM_SWD_TagConnect_TC2030
Connector
Tag-Connect ARM Cortex SWD JTAG connector, 6 pin
- Pins
- 6
- Pads
- 6
- Mount
- 8.0×8.5
ATmega32U4-M
MCU_Microchip_ATmega
16MHz, 32kB Flash, 2.5kB SRAM, 1kB EEPROM, USB 2.0, QFN-44
- Pins
- 45
- Pads
- 45
- SMD
- 8.3×8.3
ATmega4808-M
MCU_Microchip_ATmega
20MHz, 48kB Flash, 6kB SRAM, 256B EEPROM, VQFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
NRF24L01_Breakout
RF
Ultra low power 2.4GHz RF Transceiver, Carrier PCB
- Pins
- 8
- Pads
- 8
- THT
- 29.5×15.8
BQ24075RGT
Battery_Management
USB-Friendly Li-Ion Battery Charger and Power-Path Management, VQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
Bus_PCI_Express_x16
Connector
PCI Express bus connector x16
- Pins
- 164
- Pads
- 164
- Mount
- 85.3×9.4
DRV8833PWP
Driver_Motor
Dual H-Bridge Motor Driver, HTSSOP-16
- Pins
- 17
- Pads
- 17
- SMD
- 7.8×5.5
FUSB302BMPX
Interface_USB
Programmable USB Type-C Controller w/PD, I2C address 0x22, WQFN-14
- Pins
- 15
- Pads
- 15
- SMD
- 3.7×3.7
Arduino_Nano_ESP32
MCU_Module
Arduino Nano board based on the ESP32-S3 with a dual-core 240 MHz processor, 384 kB ROM, 512 kB SRAM. Operates at 3.3V, with 5V USB-C® input and 6-21V VIN. Features Wi-Fi®, Bluetooth® LE, digital and analog pins, and supports SPI, I2C, UART, I2S, and CAN.
- Pins
- 30
- Pads
- 30
- THT
- 18.3×46.2
ECMF02-2AMX6
Power_Protection
Single Pair Common Mode Filter with ESD Protection, UQFN-6L
- Pins
- 6
- Pads
- 6
- SMD
- 2.7×2.2
TPS63000
Regulator_Switching
Buck-Boost Converter, 1.8-5.5V Input Voltage, 1.8A Switch Current, Adjustable 1.2-5.5V Output Voltage, VSON-10
- Pins
- 11
- Pads
- 11
- SMD
- 3.9×3.9
SHT4x
Sensor_Humidity
Digital Humidity and Temperature Sensor, ±1%RH, ±0.1°C, I2C, 1.08-3.6V, 16bit, DFN-4
- Pins
- 4
- Pads
- 4
- SMD
- 2.4×2.0
SHTC3
Sensor_Humidity
Humidity and Temperature Sensor, ±2%RH, ±0.2°C, I2C, 1.62-3.6V, DFN-4
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.5
MPU-9250
Sensor_Motion
InvenSense 9-Axis Motion Sensor, Accelerometer, Gyroscope, Compass, I2C/SPI
- Pins
- 14
- Pads
- 24
- SMD
- 4.1×4.1
BQ24074RGT
Battery_Management
USB-Friendly Li-Ion Battery Charger and Power-Path Management, VQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
PTVS5V0Z1USK
Diode
5V, 1200W TVS unidirectional diode, DSN1608-2
- Pins
- 2
- Pads
- 2
- SMD
- 2.1×1.3