Components
8 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
ADM206
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 3 receivers (tx/rx: 4/3), shutdown / enable pins, DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
ADM207
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 5 drivers and 3 receivers (tx/rx: 5/3), DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
ADM208
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 4 receivers (tx/rx: 4/4), DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
ADM209
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 3 drivers and 5 receivers (tx/rx: 3/5), enable pin, external 9 V to 13.2 V supply, DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
ADM211
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 5 receivers (tx/rx: 4/5), shutdown / enable pins, SOIC-28 / SSOP-28
- Pins
- 28
- Pads
- —
- Mount
- —
ADM213
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 5 receivers (tx/rx: 4/5; 2 receivers active in shutdown), shutdown / enable pins, SOIC-28 / SSOP-28
- Pins
- 28
- Pads
- —
- Mount
- —
MAX489E
Interface_UART
Full duplex RS-485/RS-422, 0.25 Mbps, ±15kV electro-static discharge (ESD) protection, slew-rate limited, no low-power shutdown, with with receiver/driver enable, 32 receiver drive capability, 0 to +70 degree Celsius, DIP-14 and SOIC-14
- Pins
- 14
- Pads
- —
- Mount
- —
MAX491E
Interface_UART
Full duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate limited, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, 0 to +70 degree Celsius, DIP-14 and SOIC-14
- Pins
- 14
- Pads
- —
- Mount
- —