Components
15 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
Antenna
Device
Antenna
- Pins
- 1
- Pads
- —
- Mount
- —
Antenna_Chip
Device
Ceramic chip antenna with pin for PCB trace
- Pins
- 2
- Pads
- —
- Mount
- —
Antenna_Dipole
Device
Dipole antenna
- Pins
- 2
- Pads
- —
- Mount
- —
Antenna_Loop
Device
Loop antenna
- Pins
- 2
- Pads
- —
- Mount
- —
Antenna_Shield
Device
Antenna with extra pin for shielding
- Pins
- 2
- Pads
- —
- Mount
- —
ESP32-S3-MINI-1
espressif-Espressif
Smallsized module supporting 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 8 MB, optional 2 MB PSRAM in chip package 39 GPIOs, rich set of peripherals Onboard PCB antenna or external antenna connector
- Pins
- 65
- Pads
- —
- Mount
- —
ESP32-S3-WROOM-1
espressif-Espressif
2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna
- Pins
- 41
- Pads
- —
- Mount
- —
ESP32-S3-WROOM-2
espressif-Espressif
2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna
- Pins
- 41
- Pads
- —
- Mount
- —
ESP32-S31-WROOM-3
espressif-Espressif
2.4 GHz Wi-Fi 6, Bluetooth 5.4 (LE), Bluetooth Classic, Zigbee and Thread (802.15.4) module Built around ESP32-S31 series of SoCs, RISC-V 32-bit dual-core microprocessor 54 GPIOs, rich set of peripherals On-board PCB antenna
- Pins
- 99
- Pads
- —
- Mount
- —
ESP32-WROOM-DA
espressif-Espressif
ESP32-WROOM-DA
- Pins
- 30
- Pads
- —
- Mount
- —
ESP32-WROVER-E
espressif-Espressif
ESP32-WROVER-E and ESP32-WROVER-IE are two powerful, generic WiFi-BT-BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. ESP32-WROVER-E comes with a PCB antenna, and ESP32-WROVER-IE with an IPEX antenna. They both featurea 4 MB external SPI flash and an additional 8 MB SPI Pseudo static RAM (PSRAM).
- Pins
- 30
- Pads
- —
- Mount
- —
RF, GPS, Antenna
jlcpcb-JLCPCB-Extended
Antenna with extra pin for shielding
- Pins
- 1
- Pads
- —
- Mount
- —
1462360001
kiml-00-kiml-antenna-rfid
- Pins
- 2
- Pads
- —
- Mount
- —
ESP32-S3-WROOM-1-N16R8
kiml-00-kiml-rf-module
2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna
- Pins
- 41
- Pads
- —
- Mount
- —
ESP32-S3-WROOM-1-N8R2
kiml-00-kiml-rf-module
2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna
- Pins
- 41
- Pads
- —
- Mount
- —