Components
173 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
MPU-6050
Sensor_Motion
InvenSense 6-Axis Motion Sensor, Gyroscope, Accelerometer, I2C
- Pins
- 24
- Pads
- 24
- SMD
- 5.3×5.3
FUSB302BMPX
Interface_USB
Programmable USB Type-C Controller w/PD, I2C address 0x22, WQFN-14
- Pins
- 15
- Pads
- 15
- SMD
- 3.7×3.7
SHT4x
Sensor_Humidity
Digital Humidity and Temperature Sensor, ±1%RH, ±0.1°C, I2C, 1.08-3.6V, 16bit, DFN-4
- Pins
- 4
- Pads
- 4
- SMD
- 2.4×2.0
SHTC3
Sensor_Humidity
Humidity and Temperature Sensor, ±2%RH, ±0.2°C, I2C, 1.62-3.6V, DFN-4
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.5
TAS5805MPWP
Amplifier_Audio
23W Stereo, Inductor-Less, Digital Input, Closed-Loop Class-D Audio Amplifier, HTSSOP-28
- Pins
- 29
- Pads
- 29
- SMD
- 7.8×10.2
AD5697RBCPZ
Analog_DAC
Dual, 12-Bit nanoDAC+ with 2 ppm/°C Reference, I2C Interface, LFCSP-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.2×4.2
MAX14662
Analog_Switch
Analog Switch, beyond-the-Rails 8xSPST, I²C/SPI interface, 1.6..5.5V supply, 0.425Ohm Ron, WQFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 5.3×5.3
ADAU1361
Audio
Stereo, Low Power, 96 kHz, 24-bit Audio Codec with Integrated PLL, VQFN-32 (LFCSP-32)
- Pins
- 33
- Pads
- 33
- SMD
- 6.2×6.2
ADAU1761
Audio
SigmaDSP Stereo, Low Power, 96 kHz, 24-bit Audio Codec with Integrated PLL, VQFN-32 (LFCSP-32)
- Pins
- 33
- Pads
- 33
- SMD
- 6.2×6.2
ES8388
Audio
Low Power Stereo Audio CODEC With Headphone Amplifier, 24-bit, 8kHz - 96kHz ADC / DAC sampling frequency, 1.8V - 3.3V supply, WQFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 5.2×5.2
BQ25798
Battery_Management
I2C controlled, 5A Buck-Boost battery charger (1-4 cell, Li-Ion / Li-Polymer), USB BC1.2 / HVDCP detection, 3.6..24V VBUS, 3..18.8V charge voltage regulation, 0.75..1.5 MHz, VQFN-29 (Texas RQM0029A)
- Pins
- 29
- Pads
- 29
- SMD
- 4.9×4.9
LTC2942
Battery_Management
Battery Gas Gauge with Temperature, Voltage Measurement, DFN-6
- Pins
- 6
- Pads
- 7
- SMD
- 4.2×2.5
LTC2942-1
Battery_Management
1A Battery Gas Gauge with Internal Sense Resistor and Temperature/Voltage Measurement, DFN-6
- Pins
- 6
- Pads
- 7
- SMD
- 4.2×2.5
LTC4156
Battery_Management
Dual-Input Power Manager / 3.5A LiFePO4 Battery Charger with I2C Control and USB OTG, QFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 5.3×6.3
SLG46580
CPLD_Renesas
GreenPAK Programmable Mixed-signal Matrix with Asynchronous State Machine, four 150mA LDO Regulators, UQFN-20
- Pins
- 20
- Pads
- 20
- SMD
- 3.2×4.2
SLG46582
CPLD_Renesas
GreenPAK Programmable Mixed-signal Matrix with Asynchronous State Machine, two 300mA LDO Regulators, UQFN-20
- Pins
- 20
- Pads
- 20
- SMD
- 3.2×4.2
SLG46583
CPLD_Renesas
GreenPAK Programmable Mixed-signal Matrix with Asynchronous State Machine, one 600mA LDO Regulator, UQFN-20
- Pins
- 20
- Pads
- 20
- SMD
- 3.2×4.2
SLG47011V
CPLD_Renesas
GreenPAK Programmable Mixed-Signal Matrix, 8/10/12/14-bit SAR ADC, 13 GPIO + 1 GPI, 1.71V - 3.6V supply, UQFN-16
- Pins
- 16
- Pads
- 16
- SMD
- 2.8×2.8
CH455G
Driver_LED
Digital tube driver and keyboard scan (common cathode only), SOIC-16 (SOP-16)
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
CH455H
Driver_LED
Digital tube driver and keyboard scan (common cathode only), with interrupt/current setting, SOP-18
- Pins
- 18
- Pads
- 18
- SMD
- 11.9×12.0
iC-HTG
Driver_LED
CW power laser diode driver, external driver transistor, integrated DAC & ADC, SPI or I2C, 3 to 24V supply, temperature monitor, HVQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
KTD2026
Driver_LED
4-channel constant-current linear LED Driver, I2C interface, 0.125..24mAout, VIN 2.7..5.5V, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 2.7×2.0
KTD2027
Driver_LED
4-channel constant-current linear LED Driver, I2C interface, 0.125..24mAout, VIN 2.7..5.5V DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 2.7×2.0
KTD2061xxUAC
Driver_LED
36-channel (12xRGB) LED driver with I²C Control, VCC = VIN = 2.5..5.5V, 23kHz MUX frequency, UQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 4.2×4.2