Components
18 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
DAC60502
Analog_DAC
12-bit dual-channel voltage output DAC, 2.5V 5ppm/°C internal reference, WSON-10
- Pins
- 10
- Pads
- 10
- SMD
- 3.8×3.0
DAC60504
Analog_DAC
12-bit quad-channel voltage output DAC, 2.5V 2ppm/°C internal reference, WQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
DAC70502
Analog_DAC
14-bit dual-channel voltage output DAC, 2.5V 5ppm/°C internal reference, WSON-10
- Pins
- 10
- Pads
- 10
- SMD
- 3.8×3.0
DAC70504
Analog_DAC
14-bit quad-channel voltage output DAC, 2.5V 2ppm/°C internal reference, WQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
DAC80502
Analog_DAC
16-bit dual-channel voltage output DAC, 2.5V 5ppm/°C internal reference, WSON-10
- Pins
- 10
- Pads
- 10
- SMD
- 3.8×3.0
DAC80504
Analog_DAC
16-bit quad-channel voltage output DAC, 2.5V 2ppm/°C internal reference, WQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
DAC8560IxDGK
Analog_DAC
16-bit DAC, Voltage Output, Ultra-Low Glitch, Rail-to-Rail Output, 2.5V 2-ppm/°C Internal Reference, SPI interface, VSON-8 3x3mm package
- Pins
- 8
- Pads
- 9
- SMD
- 4.3×3.5
LTC2942-1
Battery_Management
1A Battery Gas Gauge with Internal Sense Resistor and Temperature/Voltage Measurement, DFN-6
- Pins
- 6
- Pads
- 7
- SMD
- 4.2×2.5
IS31LT3360
Driver_LED
Constant current LED driver, internal switch, up to 40V/1.2A, SOT-89-5
- Pins
- 5
- Pads
- 5
- SMD
- 5.7×5.0
TMC2202-WA
Driver_Motor
Standalone driver for two-phase bipolar stepper motor, 2A, 4.75… 36V, UART, internal FETs, QFN32
- Pins
- 32
- Pads
- 33
- SMD
- 6.2×6.2
TMC2208-LA
Driver_Motor
Standalone driver for two-phase bipolar stepper motor, 2A, 4.75..36V, UART, internal FETs, VQFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 6.2×6.2
TMC2224-LA
Driver_Motor
Standalone driver for two-phase bipolar stepper motor, 2A, 4.75… 36V, UART, internal FETs, QFN28
- Pins
- 28
- Pads
- 33
- SMD
- 6.2×6.2
C8051F321-GM
MCU_SiliconLabs
16 KB ISP FLASH MCU Family with Full Speed USB, 2304 bytes internal RAM, 21 port I/O, 10-bit ADC, built-in temperature sensor, fully compatible with MCS-51 instruction set, QFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 6.2×6.2
CH32V003AxMx
MCU_WCH_RiscV
CH32V003 series are industrial-grade general-purpose microcontrollers designed based on 32-bit RISC-V instruction set and architecture. It adopts QingKe V2A core, RV32EC instruction set, and supports 2 levels of interrupt nesting. The series are mounted with rich peripheral interfaces and function modules. Its internal organizational structure meets the low-cost and low-power embedded application scenarios.
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
SP335
muratovas-MAS_IC_Interface
RS-232/RS-485/RS-422 TRANSCEIVER WITH INTERNAL TERMINATION
- Pins
- 33
- Pads
- 33
- SMD
- 6.2×6.2
LTC3561EDD
Regulator_Switching
1A, 0.8V to 5V out, up to 4MHz Synchronous buck converter with internal switch, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×3.5
MAX17572
Regulator_Switching
4.5V–60V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation, DFN-12
- Pins
- 13
- Pads
- 13
- SMD
- 4.3×3.6
MIC2290
Regulator_Switching
1.2 Mhz PWM Boost Regulator with Internal Schotty Diode, MLF-8
- Pins
- 9
- Pads
- 9
- SMD
- 2.7×2.5