Components
48 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
MAX3221
Interface_UART
RS232 transceiver with 15kV ESD protection
- Pins
- 16
- Pads
- —
- Mount
- —
THVD1450DR
Interface_UART
3.3-V to 5-V RS-485 transceiver with ±18-kV IEC ESD protection, VSON-8
- Pins
- 8
- Pads
- 9
- SMD
- 4.3×3.5
THVD1451D
Interface_UART
RS485 transceiver, 3.3-V to 5-V, 18-kV IEC ESD Protection, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX491E
Interface_UART
Full duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate limited, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, 0 to +70 degree Celsius, DIP-14 and SOIC-14
- Pins
- 14
- Pads
- —
- Mount
- —
THVD1450D
Interface_UART
3.3-V to 5-V RS-485 transceiver with ±18-kV IEC ESD protection, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX489E
Interface_UART
Full duplex RS-485/RS-422, 0.25 Mbps, ±15kV electro-static discharge (ESD) protection, slew-rate limited, no low-power shutdown, with with receiver/driver enable, 32 receiver drive capability, 0 to +70 degree Celsius, DIP-14 and SOIC-14
- Pins
- 14
- Pads
- —
- Mount
- —
ISL3178E
Interface_UART
20Mbps, 3.3V RS-485 transceiver, ±15-kV IEC ESD protection, -7V..+12V common mode voltage, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SN65HVD1782
Interface_UART
Fault-Protected RS-485 Transceivers With 3.3-V to 5-V Operation, up to 10 Mbps, up to 320, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ISL3175E
Interface_UART
500kbps, 3.3V RS-485 transceiver, ±15-kV IEC ESD protection, -7V..+12V common mode voltage, slew-rate limit, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX487E
Interface_UART
Half duplex RS-485/RS-422, 0.25 Mbps, ±15kV electro-static discharge (ESD) protection, with slew-rate, with low-power shutdown, with receiver/driver enable, 128 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ISL3172E
Interface_UART
250kbps, 3.3V RS-485 transceiver, ±15-kV IEC ESD protection, -7V..+12V common mode voltage, slew-rate limit, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX1487E
Interface_UART
Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, no low-power shutdown, with receiver/driver enable, 128 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
THVD1500
Interface_UART
Half duplex RS-485, 500 Kbps, 4.5V - 5.5V supply, ±8kV electro-static discharge (ESD) protection, with receiver/driver enable, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX483E
Interface_UART
Half duplex RS-485/RS-422, 0.25 Mbps, ±15kV electro-static discharge (ESD) protection, with slew-rate, with low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX485E
Interface_UART
Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX14783ExS
Interface_UART
High-Speed 3.3V/5V RS-485/RS-422 Transceiver with ±35kV HBM ESD Protection, SOIC8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX481E
Interface_UART
Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, with low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SN65HVD1780
Interface_UART
Fault-Protected RS-485 Transceivers With 3.3-V to 5-V Operation, up to 115 kbps, up to 320, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SN65HVD1781
Interface_UART
Fault-Protected RS-485 Transceivers With 3.3-V to 5-V Operation, up to 1 Mbps, up to 320, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX490E
Interface_UART
Full duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate limited, no low-power shutdown, no with receiver/driver enable, 32 receiver drive capability, -40 to +85 degree Celsius, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX488E
Interface_UART
Full duplex RS-485/RS-422, 0.25 Mbps, ±15kV electro-static discharge (ESD) protection, slew-rate limited, no low-power shutdown, no with receiver/driver enable, 32 receiver drive capability, 0 to +70 degree Celsius, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
THVD1400D
Interface_UART
Half duplex RS-485/RS-422, 500 Kbps, 3V - 5.5V supply, ±12kV electro-static discharge (ESD) protection, with receiver/driver enable, 32 receiver drive capacity, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
THVD1420D
Interface_UART
Half duplex RS-485/RS-422, 12 Mbps, 3V - 5.5V supply, ±12kV electro-static discharge (ESD) protection, with receiver/driver enable, 32 receiver drive capacity, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SSP3085
Interface_UART
RS-485, RS-422 Half duplex 500kbps transceiver, 15kV ESD protected, 5V operating voltage, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX3075E
Interface_UART
+3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX3072E
Interface_UART
+3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX3078E
Interface_UART
+3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ST232ExD
Interface_UART
+/-15 kV ESD-protected 5V powered RS-232 dual transceiver (tx/rx: 2/2), 230kbps, 1uF capacitors operation, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
SP3485CP
Interface_UART
3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, DIP8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
SP3485EP
Interface_UART
Industrial 3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, DIP8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
SP3481EP
Interface_UART
Industrial 3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, DIP8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
ST202ExD
Interface_UART
+/-15 kV ESD-protected 5V powered RS-232 dual transceiver (tx/rx: 2/2), 230kbps, 0.1uF capacitors operation, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
SP3481CP
Interface_UART
3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, DIP8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
MAX13432EESD
Interface_UART
RS485 transceiver, full duplex, dual supply, receiver/driver enable, 500kbps, SOIC-14 package
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2
ADM2687E
Interface_UART
Isolated RS485/RS422 Transceiver, Integrated Isolated DC-DC Converter, 500kbps, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×13.3
MAX13433EESD
Interface_UART
RS485 transceiver, full duplex, dual supply, receiver/driver enable, 16Mbps, SOIC-14 package
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2
MAX3284E
Interface_UART
±15kV ESD-Protected 52Mbps, 3V to 5.5V RS-485/RS-422 True Fail-Safe Receivers, SOT23
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
ADM242
Interface_UART
Dual RS232 driver/receiver, 5V supply, 200kb/s, separate shutdown/enable pins
- Pins
- 18
- Pads
- —
- Mount
- —
ISO1500
Interface_UART
Half duplex RS-485/RS-422 transceiver, 3-kVRMS Isolated, SSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
MAX13432EETD
Interface_UART
RS485 transceiver, full duplex, dual supply, receiver/driver enable, 500kbps, DFN-14 package
- Pins
- 15
- Pads
- 15
- SMD
- 4.0×3.6
ADM2682E
Interface_UART
Isolated RS485/RS422 Transceiver, Integrated Isolated DC-DC Converter, 16Mbps, SOIC-16W
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×13.3
ISL83491
Interface_UART
10Mbps RS485/RS422 transceiver, full duplex, receiver/driver enable, low power shutdown
- Pins
- 12
- Pads
- —
- Mount
- —
SP3481EN
Interface_UART
Industrial 3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SP3485EN
Interface_UART
Industrial 3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX3488xPA
Interface_UART
Full duplex RS-485/RS-422, 0.25 Mbps, slew-rate limited, no low-power shutdown, no with receiver/driver enable, 32 receiver drive capability, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
MAX13433EETD
Interface_UART
RS485 transceiver, full duplex, dual supply, receiver/driver enable, 16Mbps, DFN-14 package
- Pins
- 15
- Pads
- 15
- SMD
- 4.0×3.6
THVD8000
Interface_UART
RS-485 500 kbps Transceiver with OOK Modulation for Power Line Communication, 3V-5.5V supply, -7 to +12V common mode range, SOT-23-8
- Pins
- 8
- Pads
- 8
- SMD
- 4.1×3.4
ISO3082DW
Interface_UART
200 kbps, Isolated 5-V Half-Duplex RS-485 transceiver, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8