Components
43 components matching “power”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
SP3481EN
Interface_UART
Industrial 3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SP3481EP
Interface_UART
Industrial 3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, DIP8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
SP3485CP
Interface_UART
3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, DIP8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
SP3485EP
Interface_UART
Industrial 3.3V Low Power Half-Duplex RS-485 Transceiver 10Mbps, DIP8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
ST202ExD
Interface_UART
+/-15 kV ESD-protected 5V powered RS-232 dual transceiver (tx/rx: 2/2), 230kbps, 0.1uF capacitors operation, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
ST232ExD
Interface_UART
+/-15 kV ESD-protected 5V powered RS-232 dual transceiver (tx/rx: 2/2), 230kbps, 1uF capacitors operation, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
THVD8000
Interface_UART
RS-485 500 kbps Transceiver with OOK Modulation for Power Line Communication, 3V-5.5V supply, -7 to +12V common mode range, SOT-23-8
- Pins
- 8
- Pads
- 8
- SMD
- 4.1×3.4
ISL3298xxRT
Interface_UART
RS485, RS422, 20Mbps Transceiver, 3.0V to 7V, Low-Power, TDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×2.5
MAX3232
Interface_UART
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1μF External Capacitors
- Pins
- 16
- Pads
- —
- Mount
- —
ICL3232
Interface_UART
3.0V to 5.5V, Low-Power, up to 250kbps, True RS-232 Transceivers Using Four 0.1μF External Capacitors
- Pins
- 16
- Pads
- —
- Mount
- —
ADM206
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 3 receivers (tx/rx: 4/3), shutdown / enable pins, DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
ADM207
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 5 drivers and 3 receivers (tx/rx: 5/3), DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
ADM208
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 4 receivers (tx/rx: 4/4), DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
ADM209
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 3 drivers and 5 receivers (tx/rx: 3/5), enable pin, external 9 V to 13.2 V supply, DIP-24 (300 mil) / SOIC-24 / SSOP-24
- Pins
- 24
- Pads
- —
- Mount
- —
ADM211
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 5 receivers (tx/rx: 4/5), shutdown / enable pins, SOIC-28 / SSOP-28
- Pins
- 28
- Pads
- —
- Mount
- —
ADM213
Interface_UART
0.1 μF, 5V powered CMOS RS-232 120kb/s transceiver with 4 drivers and 5 receivers (tx/rx: 4/5; 2 receivers active in shutdown), shutdown / enable pins, SOIC-28 / SSOP-28
- Pins
- 28
- Pads
- —
- Mount
- —
ISL83491
Interface_UART
10Mbps RS485/RS422 transceiver, full duplex, receiver/driver enable, low power shutdown
- Pins
- 12
- Pads
- —
- Mount
- —
MAX489E
Interface_UART
Full duplex RS-485/RS-422, 0.25 Mbps, ±15kV electro-static discharge (ESD) protection, slew-rate limited, no low-power shutdown, with with receiver/driver enable, 32 receiver drive capability, 0 to +70 degree Celsius, DIP-14 and SOIC-14
- Pins
- 14
- Pads
- —
- Mount
- —
MAX491E
Interface_UART
Full duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate limited, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, 0 to +70 degree Celsius, DIP-14 and SOIC-14
- Pins
- 14
- Pads
- —
- Mount
- —