Components
55 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
MCP4728
Analog_DAC
12-bit digital to analog converter, quad output, 2.048V internal reference, integrated EEPROM, I2C interface
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
MCP4801-EMC
Analog_DAC
8-Bit D/A Converters with SPI Interface, internal Reference (2.048V)
- Pins
- 9
- Pads
- 9
- SMD
- 4.2×2.6
MCP4811-EMC
Analog_DAC
10-Bit D/A Converters with SPI Interface, internal Reference (2.048V)
- Pins
- 9
- Pads
- 9
- SMD
- 4.2×2.6
MCP4821-EMC
Analog_DAC
12-Bit D/A Converters with SPI Interface, internal Reference (2.048V)
- Pins
- 9
- Pads
- 9
- SMD
- 4.2×2.6
LTC2942-1
Battery_Management
1A Battery Gas Gauge with Internal Sense Resistor and Temperature/Voltage Measurement, DFN-6
- Pins
- 6
- Pads
- 7
- SMD
- 4.2×2.5
PI6C5946002ZH
Buffer
6 GHz / 12 Gbps Clock / Data 1:2 Fanout Buffer with Internal Termination, TQFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
ADCMP350
Comparator
Single-input comparator, internal 0.6V reference, Active-Low Open-Drain output, KS-4
- Pins
- 4
- Pads
- 4
- SMD
- 3.0×2.8
ADCMP354
Comparator
Single-input comparator, internal 0.6V reference, Active-High Open-Drain output, KS-4
- Pins
- 4
- Pads
- 4
- SMD
- 3.0×2.8
ADCMP356
Comparator
Single-input comparator, internal 0.6V reference, Active-High Push-Pull output, KS-4
- Pins
- 4
- Pads
- 4
- SMD
- 3.0×2.8
IS31LT3360
Driver_LED
Constant current LED driver, internal switch, up to 40V/1.2A, SOT-89-5
- Pins
- 5
- Pads
- 5
- SMD
- 5.7×5.0
TPS61165DBV
Driver_LED
High-Brightness, White LED Driver, 3V to 18V input voltage range, internal switch, constant current, up to 38V/1.2A output, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
TPS61165DRV
Driver_LED
High-Brightness, White LED Driver, 3V to 18V input voltage range, internal switch, constant current, up to 38V/1.2A output, WSON-6
- Pins
- 7
- Pads
- 7
- SMD
- 2.7×2.5
TMC2202-WA
Driver_Motor
Standalone driver for two-phase bipolar stepper motor, 2A, 4.75… 36V, UART, internal FETs, QFN32
- Pins
- 32
- Pads
- 33
- SMD
- 6.2×6.2
TMC2208-LA
Driver_Motor
Standalone driver for two-phase bipolar stepper motor, 2A, 4.75..36V, UART, internal FETs, VQFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 6.2×6.2
TMC2224-LA
Driver_Motor
Standalone driver for two-phase bipolar stepper motor, 2A, 4.75… 36V, UART, internal FETs, QFN28
- Pins
- 28
- Pads
- 33
- SMD
- 6.2×6.2
C8051F320-GQ
MCU_SiliconLabs
16 KB ISP FLASH MCU Family with Full Speed USB, 2304 bytes internal RAM, 25 port I/O, 10-bit ADC, built-in temperature sensor, fully compatible with MCS-51 instruction set, LQFP-32
- Pins
- 32
- Pads
- 32
- SMD
- 10.4×10.4
C8051F321-GM
MCU_SiliconLabs
16 KB ISP FLASH MCU Family with Full Speed USB, 2304 bytes internal RAM, 21 port I/O, 10-bit ADC, built-in temperature sensor, fully compatible with MCS-51 instruction set, QFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 6.2×6.2
CH32V003AxMx
MCU_WCH_RiscV
CH32V003 series are industrial-grade general-purpose microcontrollers designed based on 32-bit RISC-V instruction set and architecture. It adopts QingKe V2A core, RV32EC instruction set, and supports 2 levels of interrupt nesting. The series are mounted with rich peripheral interfaces and function modules. Its internal organizational structure meets the low-cost and low-power embedded application scenarios.
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
CH32V003FxPx
MCU_WCH_RiscV
CH32V003 series are industrial-grade general-purpose microcontrollers designed based on 32-bit RISC-V instruction set and architecture. It adopts QingKe V2A core, RV32EC instruction set, and supports 2 levels of interrupt nesting. The series are mounted with rich peripheral interfaces and function modules. Its internal organizational structure meets the low-cost and low-power embedded application scenarios.
- Pins
- 20
- Pads
- 20
- SMD
- 7.7×7.0
CH32V003FxUx
MCU_WCH_RiscV
CH32V003 series are industrial-grade general-purpose microcontrollers designed based on 32-bit RISC-V instruction set and architecture. It adopts QingKe V2A core, RV32EC instruction set, and supports 2 levels of interrupt nesting. The series are mounted with rich peripheral interfaces and function modules. Its internal organizational structure meets the low-cost and low-power embedded application scenarios.
- Pins
- 21
- Pads
- 21
- SMD
- 4.3×4.3
CH32V003JxMx
MCU_WCH_RiscV
CH32V003 series are industrial-grade general-purpose microcontrollers designed based on 32-bit RISC-V instruction set and architecture. It adopts QingKe V2A core, RV32EC instruction set, and supports 2 levels of interrupt nesting. The series are mounted with rich peripheral interfaces and function modules. Its internal organizational structure meets the low-cost and low-power embedded application scenarios. JEITA SOIC-8 (SOP-8)
- Pins
- 8
- Pads
- 8
- SMD
- 7.3×5.4
SP335
muratovas-MAS_IC_Interface
RS-232/RS-485/RS-422 TRANSCEIVER WITH INTERNAL TERMINATION
- Pins
- 33
- Pads
- 33
- SMD
- 6.2×6.2
NCP361MU
Power_Protection
USB Positive Overvoltage Protection Controller with Internal PMOS FET and Overcurrent Protection, DFN-6
- Pins
- 6
- Pads
- 7
- SMD
- 3.3×2.5
NCP361SN
Power_Protection
USB Positive Overvoltage Protection Controller with Internal PMOS FET and Overcurrent Protection, TSOP-5
- Pins
- 5
- Pads
- 5
- SMD
- 3.5×3.5