Components
579 components matching “supply”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
MCP2542FDxMF
Interface_CAN_LIN
CAN-FD Transceiver, Wake-Up on CAN activity, 8Mbps, 5V supply, STBY pin, 3x3 DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×3.5
MCP2562-E-MF
Interface_CAN_LIN
High-Speed CAN Transceiver, 1Mbps, 5V supply, Vio pin, -40C to +125C, DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×3.5
MCP2562-H-SN
Interface_CAN_LIN
High-Speed CAN Transceiver, 1Mbps, 5V supply, Vio pin, -40C to +150C, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ST485E
Interface_UART
Half duplex RS-485/RS-422, 5 Mbps, ±15kV ESD, 5V supply, 256 bus load, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
THVD1400D
Interface_UART
Half duplex RS-485/RS-422, 500 Kbps, 3V - 5.5V supply, ±12kV electro-static discharge (ESD) protection, with receiver/driver enable, 32 receiver drive capacity, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
TPS3839DBZ
Power_Supervisor
150-nA, Ultralow Power, Supply Voltage Monitor, SOT-23
- Pins
- 3
- Pads
- 3
- SMD
- 3.9×3.4
ACS711xLCTR-25AB
Sensor_Current
±25A, Bidirectional, Hall-Effect Current Sensor, +3.3V supply, 55mV/A, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADA4522-1
Amplifier_Operational
55 V supply, 5uV max Vos, 3MHz GBW, EMI Enhanced, Zero Drift, 5.8 nV/√Hz, RRO single operational amplifier
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MCP601-xSN
Amplifier_Operational
Single 2.7V to 6.0V Single Supply CMOS Op Amps, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MCP601-xST
Amplifier_Operational
Single 2.7V to 6.0V Single Supply CMOS Op Amps, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.7×3.5
OPA310xDBV
Amplifier_Operational
High output current, Rail-to-Rail Input/Output, 3MHz GBW, Operational Amplifiers, integrated RFI/EMI filter, 1.5V to 5.5V supply, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
ADS8688
Analog_ADC
16-Bit, 500-kSPS, 8-Channels, Single-Supply, SAR ADC with Bipolar Input Range, TSSOP-38
- Pins
- 38
- Pads
- 38
- SMD
- 7.7×10.2
LTC1865-S8
Analog_ADC
Dual channel 16-bit SAR Analog to Digital Converter, 5V supply, 150ksps, SPI interface
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
CA-IF1042LVS
Interface_CAN_LIN
High-Speed CAN Transceiver up to 5 Mbps, separate VIO, standby mode, ±30V bus common mode voltage, 5V supply, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ISOW1044
Interface_CAN_LIN
Isolated CAN FD Transceiver, Integrated DC-DC Converter, 5Mbps, Reinforced Isolation, SOIC-20W
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
THVD1420D
Interface_UART
Half duplex RS-485/RS-422, 12 Mbps, 3V - 5.5V supply, ±12kV electro-static discharge (ESD) protection, with receiver/driver enable, 32 receiver drive capacity, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ISOW7742
Isolator
Quad-Channel 2/2 Digital Isolator with Integrated Low-Emissions, Low-Noise DC-DC Converter, SOIC-20W
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
74LVCH2T45DC
Logic_LevelTranslator
Dual supply translating transceiver with bus-hold for unused/floating inputs, 3-state, 2-bit, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 4.6×2.5
SN74LV1T125DBV
Logic_LevelTranslator
Single Power Supply, Single Buffer Gate with 3-State Output, CMOS Logic Level Shifter Level Shifter, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
SN6505BDBV
Power_Management
Low Noise, 1A, Transformer Drivers for Isolated Power Supplies, 420 kHz, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
ACS711xLCTR-12AB
Sensor_Current
±12.5A Bidirectional Hall-Effect Current Sensor, +3.3V supply, 110mV/A, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ACS722xLCTR-20AU
Sensor_Current
20A Unidirectional Hall-Effect Current Sensor, +3.3V supply, 132mV/A, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ACS723xLCTR-05AB
Sensor_Current
±5A Bidirectional Hall-Effect Current Sensor, +5.0V supply, 400mV/A, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ACS725xLCTR-10AU
Sensor_Current
10A Unidirectional Hall-Effect Current Sensor, +3.3V supply, 264mV/A, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4