Components
51 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
RaspberryPi_Pico_Extensive
MCU_Module
Versatile and inexpensive microcontroller module (with full pinout for test point and debug connections) powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash; also supports Raspberry Pi Pico 2
- Pins
- 49
- Pads
- 49
- SMD
- 23.1×53.9
PCM1862DBT
Audio
2-Channel, 192 kHz, 24-bit, Audio ADC, 103dB SNR, I2S / left/right-justified / TDM digital output formats, I2C / SPI control interface, 2 digital microphone support, TSSOP-30
- Pins
- 30
- Pads
- 30
- SMD
- 7.7×8.3
PCM1864DBT
Audio
4-Channel, 192 kHz, 24-bit, Audio ADC, 103dB SNR, I2S / left/right-justified / TDM digital output formats, I2C / SPI control interface, 4 digital microphone support (DMIN2 pin), TSSOP-30
- Pins
- 30
- Pads
- 30
- SMD
- 7.7×8.3
DS2745U
Battery_Management
Current-flow, voltage and temperature measurement to support battery capacity monitoring, 2.5V to 4.5V VDD, -40 to +85 degree Celsius, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 5.9×3.6
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
ESP32-C3
espressif-Espressif
ESP32-C3 family is an ultra-low-power MCU-based SoC solution that supports 2.4 GHz Wi-Fi and Bluetooth®Low Energy (Bluetooth LE).
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
ESP32-S3
espressif-Espressif
ESP32-S3 is a low-power MCU-based system-on-chip (SoC) that supports 2.4 GHz Wi-Fi and Bluetooth® Low Energy (Bluetooth LE). It consists of high-performance dual-core microprocessor (Xtensa® 32-bit LX7), a low power coprocessor, a Wi-Fi baseband, a Bluetooth LE baseband, RF module, and peripherals.
- Pins
- 57
- Pads
- 57
- SMD
- 8.3×8.3
ESP8684
espressif-Espressif
ESP8684 is an UltraLowPower SoC with RISCV SingleCore CPU,Supporting IEEE 802.11b/g/n (2.4 GHz WiFi) and Bluetooth 5 (LE)
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
KSZ8081MLX
Interface_Ethernet
10BASE-T/100BASE-TX PHY with RMII Support, 25 MHz input clock, LQFP-48
- Pins
- 47
- Pads
- 48
- SMD
- 10.3×10.3
KSZ8081RNA
Interface_Ethernet
10BASE-T/100BASE-TX PHY with RMII Support, 25 MHz input clock/50 MHz output, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
KSZ8081RND
Interface_Ethernet
10BASE-T/100BASE-TX PHY with RMII Support, 50 MHz input clock, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
MAX14830
Interface_UART
Quad UART with I2C/SPI interface, 128 Word FIFOs, IrDA SIR built-in support, TQFN-48
- Pins
- 49
- Pads
- 49
- SMD
- 8.3×8.3
SC16IS740
Interface_UART
Single UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
SC16IS750xBS
Interface_UART
Single UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, HVQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
SC16IS750xPW
Interface_UART
Single UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, TSSOP-24
- Pins
- 24
- Pads
- 24
- SMD
- 7.7×8.3
SC16IS752IBS
Interface_UART
Dual UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, HVQFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
SC16IS752IPW
Interface_UART
Dual UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, TSSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 7.7×10.2
SC16IS760xBS
Interface_UART
Single UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, HVQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
SC16IS760xPW
Interface_UART
Single UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, TSSOP-24
- Pins
- 24
- Pads
- 24
- SMD
- 7.7×8.3
SC16IS762IBS
Interface_UART
Dual UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, HVQFN-32
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
SC16IS762IPW
Interface_UART
Dual UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, TSSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 7.7×10.2
GL3224-ONY
Interface_USB
USB 3.0 Dual LUN Memory Card Reader Controller, external firmware support (SPI Flash Memory), WQFN-48
- Pins
- 49
- Pads
- 49
- SMD
- 8.3×8.3
RaspberryPi_Pico_Debug
MCU_Module
Versatile and inexpensive microcontroller module (with debug pins) powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash; also supports Raspberry Pi Pico 2
- Pins
- 43
- Pads
- 43
- SMD
- 23.1×53.9
RaspberryPi_Pico_W
MCU_Module
Versatile and inexpensive wireless microcontroller module powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash, Infineon CYW43439 2.4GHz 802.11n wireless LAN; also supports Raspberry Pi Pico 2 W
- Pins
- 40
- Pads
- 43
- SMD
- 23.1×53.9