68 matching

MCU_Module

Versatile and inexpensive microcontroller module powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash; also supports Raspberry Pi Pico 2

Pins

40

Pads

40

THT

23.1×53.9

MCU_Module

Arduino Nano board based on the ESP32-S3 with a dual-core 240 MHz processor, 384 kB ROM, 512 kB SRAM. Operates at 3.3V, with 5V USB-C® input and 6-21V VIN. Features Wi-Fi®, Bluetooth® LE, digital and analog pins, and supports SPI, I2C, UART, I2S, and CAN.

Pins

30

Pads

30

THT

18.3×46.2

MCU_Module

Versatile and inexpensive microcontroller module (with full pinout for test point and debug connections) powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash; also supports Raspberry Pi Pico 2

Pins

49

Pads

49

SMD

23.1×53.9

Audio

2-Channel, 192 kHz, 24-bit, Audio ADC, 103dB SNR, I2S / left/right-justified / TDM digital output formats, I2C / SPI control interface, 2 digital microphone support, TSSOP-30

Pins

30

Pads

30

SMD

7.7×8.3

Audio

4-Channel, 192 kHz, 24-bit, Audio ADC, 103dB SNR, I2S / left/right-justified / TDM digital output formats, I2C / SPI control interface, 4 digital microphone support (DMIN2 pin), TSSOP-30

Pins

30

Pads

30

SMD

7.7×8.3

Battery_Management

Current-flow, voltage and temperature measurement to support battery capacity monitoring, 2.5V to 4.5V VDD, -40 to +85 degree Celsius, TSSOP-8

Pins

8

Pads

8

SMD

5.9×3.6

Battery_Management

Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme

Pins

15

Pads

15

SMD

4.9×4.5

CPU_NXP_68000

16/32-bit microprocessor, 16-bit external data bus, 23-bit external address bus (effectively 24-bit), virtual memory support, loop mode, DIP-64 (900 mil, case 754-01)

Pins

64

Pads

64

THT

25.0×81.8

Driver_Motor

Parallel to serial data converter for SLA7042M/SLA7044M

Pins

13

Pads

—

Mount

—

espressif-Espressif

ESP32-C3 family is an ultra-low-power MCU-based SoC solution that supports 2.4 GHz Wi-Fi and Bluetooth®Low Energy (Bluetooth LE).

Pins

33

Pads

33

SMD

6.3×6.3

espressif-Espressif

ESP32-C3-MINI-1 family is an ultra-low-power MCU-based SoC solution that supports 2.4 GHz Wi-Fi and Bluetooth®Low Energy (Bluetooth LE).

Pins

30

Pads

—

Mount

—

espressif-Espressif

ESP32-C3-MINI-1 family is an ultra-low-power MCU-based SoC solution that supports 2.4 GHz Wi-Fi and Bluetooth®Low Energy (Bluetooth LE).

Pins

53

Pads

—

Mount

—

espressif-Espressif

ESP32-C6-MINI-1 is a module that supports 2.4 GHz Wi-Fi 6 (802.11 ax), Bluetooth® 5 (LE), Zigbee and Thread (802.15.4)

Pins

53

Pads

—

Mount

—

espressif-Espressif

ESP32-C6-WROOM-1/U is a module that supports 2.4 GHz Wi-Fi 6 (802.11 ax), Bluetooth® 5 (LE), Zigbee and Thread (802.15.4)

Pins

29

Pads

—

Mount

—

espressif-Espressif

ESP32-C2-MINI-1 family is an ultra-low-power MCU-based SoC solution that supports Bluetooth®Low Energy (Bluetooth LE), Zigbee 3.0 and Matter

Pins

53

Pads

—

Mount

—

espressif-Espressif

ESP32-S3 is a low-power MCU-based system-on-chip (SoC) that supports 2.4 GHz Wi-Fi and Bluetooth® Low Energy (Bluetooth LE). It consists of high-performance dual-core microprocessor (Xtensa® 32-bit LX7), a low power coprocessor, a Wi-Fi baseband, a Bluetooth LE baseband, RF module, and peripherals.

Pins

57

Pads

57

SMD

8.3×8.3

espressif-Espressif

Smallsized module supporting 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 8 MB, optional 2 MB PSRAM in chip package 39 GPIOs, rich set of peripherals Onboard PCB antenna or external antenna connector

Pins

65

Pads

—

Mount

—

espressif-Espressif

ESP8684 is an Ultra­Low­Power SoC with RISC­V Single­Core CPU,Supporting IEEE 802.11b/g/n (2.4 GHz Wi­Fi) and Bluetooth 5 (LE)

Pins

25

Pads

25

SMD

5.3×5.3

espressif-Espressif

ESP8685 is an ultra-low-power and highly-integrated MCU-based SoC solution that supports 2.4 GHz Wi-Fi and Bluetooth® Low Energy (Bluetooth LE).

Pins

26

Pads

—

Mount

—

Interface_Ethernet

10BASE-T/100BASE-TX PHY with RMII Support, 25 MHz input clock, LQFP-48

Pins

47

Pads

48

SMD

10.3×10.3

Interface_Ethernet

10BASE-T/100BASE-TX PHY with RMII Support, 25 MHz input clock/50 MHz output, QFN-24

Pins

25

Pads

25

SMD

5.2×5.2

Interface_Ethernet

10BASE-T/100BASE-TX PHY with RMII Support, 50 MHz input clock, QFN-24

Pins

25

Pads

25

SMD

5.2×5.2

Interface_UART

Quad UART with I2C/SPI interface, 128 Word FIFOs, IrDA SIR built-in support, TQFN-48

Pins

49

Pads

49

SMD

8.3×8.3

Interface_UART

Single UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, TSSOP-16

Pins

16

Pads

16

SMD

7.7×5.5