Footprints

1,536 footprints matching “3mm”

Land patterns on their own — 19,830 of them, most never referenced by a symbol in the catalog. Each passed the courtyard and pad checks; 7,626 come with the 3D model they name.

I need

Symbol Footprint 3D model

Footprints on their own, whether or not a symbol uses them.

1,536 footprints · page 2 of 64

Matched by name and keywords. Search by meaning instead

SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm

FP—

Jumper

SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, open

Pads: 3
SMD: 4.6×2.5
Boards: 156

TSSOP-10_3x3mm_P0.5mm

FP3D

Package_SO

TSSOP, 10 Pin (https://www.ti.com/lit/ml/mpds035c/mpds035c.pdf, https://www.ti.com/lit/ds/symlink/ads1115.pdf#page=50, https://www.nxp.com/docs/en/package-information/SOT552-1.pdf)

Pads: 10
SMD: 6.3×3.5
Boards: 153

SOIC-8_5.3x5.3mm_P1.27mm

FP3D

Package_SO

SOIC, 8 Pin (JEITA/EIAJ ED-7311-19 variation 08-001-BBA and Atmel/Microchip, 208 mils width, https://www.jeita.or.jp/japanese/standard/book/ED-7311-19/#target/page_no=21, https://ww1.microchip.com/downloads/en/DeviceDoc/20005045C.pdf#page=23, https://ww1.microchip.com/downloads/en/DeviceDoc/doc2535.pdf#page=162)

Pads: 8
SMD: 9.3×5.8
Boards: 139

SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm

FP3D

Package_SO

SOIC, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29)

Pads: 9
SMD: 7.4×5.4
Boards: 135

SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels

FP—

Jumper

SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers

Pads: 3
SMD: 4.6×2.5
Boards: 134

MountingHole_3mm_Pad

FP—

MountingHole

Mounting Hole 3mm, generated by kicad-footprint-generator mountinghole.py

Pads: 1
THT: 6.5×6.5
Boards: 131

TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal

FP3D

TerminalBlock_Phoenix

Terminal Block Phoenix PT-1,5-2-5.0-H, 2 pins, pitch 5mm, size 10x9mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf

Pads: 2
THT: 11.0×10.0
Boards: 116

TSSOP-8_3x3mm_P0.65mm

FP3D

Package_SO

TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot505-1_po.pdf)

Pads: 8
SMD: 5.9×3.6
Boards: 111

SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm

FP—

Jumper

SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 2 copper strips

Pads: 2
SMD: 3.3×2.5
Boards: 110

TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal

FP3D

TerminalBlock_Phoenix

Terminal Block Phoenix MKDS-1,5-3-5.08, 3 pins, pitch 5.08mm, size 15.2x9.8mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/100425.pdf

Pads: 3
THT: 16.3×10.8
Boards: 98

R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical

FP3D

Resistor_THT

Resistor, Axial_DIN0207 series, Axial, Vertical, pin pitch=5.08mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf

Pads: 2
THT: 7.6×3.0
Boards: 95

SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels

FP—

Jumper

SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open, labeled with numbers

Pads: 3
SMD: 4.6×2.5
Boards: 93

MountingHole_3mm_Pad_Via

FP—

MountingHole

Mounting Hole 3mm, generated by kicad-footprint-generator mountinghole.py

Pads: 1
THT: 6.5×6.5
Boards: 92

R_LDR_5.1x4.3mm_P3.4mm_Vertical

FP3D

OptoDevice

Resistor, LDR 5.1x3.4mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf

Pads: 2
THT: 5.7×4.7
Boards: 92

R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal

FP3D

Resistor_THT

Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=15.24mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf

Pads: 2
THT: 17.3×3.0
Boards: 90

SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm

FP—

Jumper

SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip

Pads: 3
SMD: 4.6×2.5
Boards: 89

MountingHole_4.3mm_M4_Pad_Via

FP—

MountingHole

Mounting Hole 4.3mm, M4, generated by kicad-footprint-generator mountinghole.py

Pads: 1
THT: 9.1×9.1
Boards: 86

QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm

FP—

Package_DFN_QFN

QFN, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3553fc.pdf#page=34)

Pads: 21
SMD: 4.3×4.3
Boards: 83

TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal

FP3D

TerminalBlock_Phoenix

Terminal Block Phoenix MKDS-3-2-5.08, 2 pins, pitch 5.08mm, size 10.2x11.2mm, drill diameter 1.3mm, pad diameter 2.6mm, http://www.farnell.com/datasheets/2138224.pdf

Pads: 2
THT: 11.2×12.2
Boards: 75

InvenSense_QFN-24_3x3mm_P0.4mm

FP—

Sensor_Motion

24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf)

Pads: 24
SMD: 4.1×4.1
Boards: 74