Footprints
80 footprints matching “0.75”
Land patterns on their own — 19,830 of them, most never referenced by a symbol in the catalog. Each passed the courtyard and pad checks; 7,626 come with the 3D model they name.
TO-92_Inline
Package_TO_SOT_THT
TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
- Pads
- 3
- THT
- 5.5×4.7
- Boards
- 988
TO-92_Inline_Wide
Package_TO_SOT_THT
TO-92 leads in-line, wide, drill 0.75mm (see NXP sot054_po.pdf)
- Pads
- 3
- THT
- 7.1×4.7
- Boards
- 358
TO-92
Package_TO_SOT_THT
TO-92 leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf)
- Pads
- 3
- THT
- 5.5×4.7
- Boards
- 181
TO-92_HandSolder
Package_TO_SOT_THT
TO-92 leads molded, narrow, drill 0.75mm, handsoldering variant with enlarged pads (see NXP sot054_po.pdf)
- Pads
- 3
- THT
- 5.5×5.1
- Boards
- 117
Fiducial_0.75mm_Mask1.5mm
Fiducial
Fiducial, circular marking, 0.75mm bare copper, 1.5mm soldermask opening (Level B)
- Pads
- —
- SMD
- 2.0×2.0
- Boards
- 115
TO-92L_Inline_Wide
Package_TO_SOT_THT
TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf)
- Pads
- 3
- THT
- 7.1×4.6
- Boards
- 100
TO-92L_HandSolder
Package_TO_SOT_THT
TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm, hand-soldering variant with enlarged pads (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf)
- Pads
- 3
- THT
- 5.5×5.1
- Boards
- 85
TO-92_Wide
Package_TO_SOT_THT
TO-92 leads molded, wide, drill 0.75mm (see NXP sot054_po.pdf)
- Pads
- 3
- THT
- 7.1×5.6
- Boards
- 66
TO-92L_Inline
Package_TO_SOT_THT
TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf)
- Pads
- 3
- THT
- 5.5×4.6
- Boards
- 51
TO-92L_Wide
Package_TO_SOT_THT
TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf)
- Pads
- 3
- THT
- 7.1×5.4
- Boards
- 17
TO-92L
Package_TO_SOT_THT
TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf)
- Pads
- 3
- THT
- 5.5×4.6
- Boards
- 14
SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm
Connector_Wire
Soldered wire connection, for 2 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
- Pads
- 2
- THT
- 8.6×3.6
- Boards
- 13
SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm
Connector_Wire
Soldered wire connection, for a single 0.75 mm² wire, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter
- Pads
- 1
- THT
- 5.0×4.5
- Boards
- 12
TO-92Flat
Package_TO_SOT_THT
TO-92Flat package, often used for hall sensors, drill 0.75mm (see e.g. http://www.ti.com/lit/ds/symlink/drv5023.pdf)
- Pads
- 3
- THT
- 4.5×2.1
- Boards
- 12
Fiducial_0.75mm_Mask2.25mm
Fiducial
Fiducial, circular marking, 0.75mm bare copper, 2.25mm soldermask opening
- Pads
- —
- SMD
- 2.8×2.8
- Boards
- 8
TO-92S
Package_TO_SOT_THT
TO-92S package, drill 0.75mm (https://www.diodes.com/assets/Package-Files/TO92S%20(Type%20B).pdf, https://www.mouser.com/datasheet/2/196/Infineon_TLV4961_1TAB_DataSheet_v01_20_EN-3363873.pdf#page=16, hole and pad size from TI land pattern in https://www.ti.com/lit/ds/symlink/lmt85.pdf#page=22)
- Pads
- 3
- THT
- 4.5×2.3
- Boards
- 8
SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm
Connector_Wire
Soldered wire connection, for 2 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter
- Pads
- 2
- THT
- 12.0×4.5
- Boards
- 7
TO-92-2
Package_TO_SOT_THT
TO-92 2-pin leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
- Pads
- 2
- THT
- 5.5×4.7
- Boards
- 7
SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm
Connector_Wire
Soldered wire connection, for a single 0.75 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
- Pads
- 1
- THT
- 3.8×3.6
- Boards
- 6
SolderWire-0.75sqmm_1x05_P4.8mm_D1.25mm_OD2.3mm
Connector_Wire
Soldered wire connection, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
- Pads
- 5
- THT
- 23.0×3.6
- Boards
- 6
SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm
Connector_Wire
Soldered wire connection, for 3 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
- Pads
- 3
- THT
- 13.4×3.6
- Boards
- 5
Heraeus_TO-92-2
Package_TO_SOT_THT
TO-92 2-pin variant by Heraeus, drill 0.75mm (http://www.produktinfo.conrad.com/datenblaetter/175000-199999/181293-da-01-de-TO92_Temperatursensor_PT1000_32209225.pdf)
- Pads
- 2
- THT
- 4.6×3.1
- Boards
- 5
SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm_Relief
Connector_Wire
Soldered wire connection with feed through strain relief, for a single 0.75 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
- Pads
- 1
- THT
- 3.8×17.5
- Boards
- 4
TO-92_Inline_Horizontal1
Package_TO_SOT_THT
TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)
- Pads
- 3
- THT
- 5.1×10.1
- Boards
- 4