Components
218 components matching “pcb”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
NMJ6HHD2
Connector_Audio
M Series, 6.35mm (1/4in) stereo jack, switched, with half threaded nose and offset PCB pins
- Pins
- 6
- Pads
- 6
- THT
- 33.9×20.2
PAM2306AYPCB
Regulator_Switching
1A, Dual Step-Down DC/DC-Converter, Out1 1.5V, Out2 1.2V, 1.5MHz, W-DFN3x3
- Pins
- 13
- Pads
- 13
- SMD
- 4.2×3.5
DCTR-52DA
RF_Module
IQRF data controlled transceiver with PCB antenna, FSK modulation
- Pins
- 8
- Pads
- 8
- SMD
- 17.5×33.2
DCTR-52DAT
RF_Module
IQRF data controlled transceiver with PCB antenna and thermometer, FSK modulation
- Pins
- 8
- Pads
- 8
- SMD
- 17.5×33.2
E18-MS1-PCB
RF_Module
Zigbee RF Module
- Pins
- 24
- Pads
- 24
- SMD
- 16.6×24.5
ESP32-S2-WROVER
RF_Module
RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, 32-bit, 2.7-3.6V, onboard antenna, SMD
- Pins
- 43
- Pads
- 43
- SMD
- 48.5×47.0
ESP32-WROOM-32D
RF_Module
RF Module, ESP32-D0WD SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD
- Pins
- 39
- Pads
- 39
- SMD
- 48.5×41.5
ESP32-WROOM-32E
RF_Module
RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD
- Pins
- 39
- Pads
- 39
- SMD
- 48.5×41.5
TR-52DA
RF_Module
IQRF common transceiver with PCB antenna, FSK modulation
- Pins
- 8
- Pads
- 8
- SMD
- 17.5×33.2
TR-52DAT
RF_Module
IQRF common transceiver with PCB antenna and thermometer, FSK modulation
- Pins
- 8
- Pads
- 8
- SMD
- 17.5×33.2
TR-72DA
RF_Module
IQRF transceiver with PCB antenna, GMSK modulation
- Pins
- 8
- Pads
- 8
- SMD
- 17.5×33.2
TR-72DAT
RF_Module
IQRF transceiver with PCB antenna and thermometer, GMSK modulation
- Pins
- 8
- Pads
- 8
- SMD
- 17.5×33.2
Antenna_Chip
Device
Ceramic chip antenna with pin for PCB trace
- Pins
- 2
- Pads
- —
- Mount
- —
D
Simulation_SPICE
Diode for simulation or PCB
- Pins
- 2
- Pads
- —
- Mount
- —
ESP32-S3-MINI-1
espressif-Espressif
Smallsized module supporting 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 8 MB, optional 2 MB PSRAM in chip package 39 GPIOs, rich set of peripherals Onboard PCB antenna or external antenna connector
- Pins
- 65
- Pads
- —
- Mount
- —
ESP32-S3-WROOM-1
espressif-Espressif
2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna
- Pins
- 41
- Pads
- —
- Mount
- —
ESP32-S3-WROOM-2
espressif-Espressif
2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna
- Pins
- 41
- Pads
- —
- Mount
- —
ESP32-S31-WROOM-3
espressif-Espressif
2.4 GHz Wi-Fi 6, Bluetooth 5.4 (LE), Bluetooth Classic, Zigbee and Thread (802.15.4) module Built around ESP32-S31 series of SoCs, RISC-V 32-bit dual-core microprocessor 54 GPIOs, rich set of peripherals On-board PCB antenna
- Pins
- 99
- Pads
- —
- Mount
- —
ESP32-WROVER-E
espressif-Espressif
ESP32-WROVER-E and ESP32-WROVER-IE are two powerful, generic WiFi-BT-BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. ESP32-WROVER-E comes with a PCB antenna, and ESP32-WROVER-IE with an IPEX antenna. They both featurea 4 MB external SPI flash and an additional 8 MB SPI Pseudo static RAM (PSRAM).
- Pins
- 30
- Pads
- —
- Mount
- —
Part Number, PCM_JLCPCB, 0.8x0.15mm
jlcpcb-JLCPCB-Manufacturing
To indicate the location, simply add the text "JLCJLCJLCJLC" to the silk layer and select the "Specify a location" option when placing your order. Please note that if this option is not chosen, we may not notice that you have added the text. Note: Use only "JLCJLCJLCJLC" without any additional characters. The font size should be larger than 0.8mm in height and 0.15mm in width.
- Pins
- —
- Pads
- —
- Mount
- —
Tooling Hole, PCM_JLCPCB, 1.152mm
jlcpcb-JLCPCB-Manufacturing
1. Two or three tooling holes should be added on the PCB, they should be placed in opposite corners of the PCB and as far apart from one another as practical. 2. Tooling holes should be 1.152mm(45.4mil) round non-plated holes with 0.148mm solder mask expansion. 3. Tooling holes are only required for PCB assembly orders. 4. Please try to add tooling holes on empty space and keep them away from traces. If there is no enough room, you can add them to the copper area.
- Pins
- —
- Pads
- —
- Mount
- —
8P8C_RJ45_J00-0014NL
kiml-00-kiml-connector-rj
CONN JACK 1PORT 100 BASE-TX PCB
- Pins
- 9
- Pads
- —
- Mount
- —
ESP32-S3-WROOM-1-N16R8
kiml-00-kiml-rf-module
2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna
- Pins
- 41
- Pads
- —
- Mount
- —
ESP32-S3-WROOM-1-N8R2
kiml-00-kiml-rf-module
2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna
- Pins
- 41
- Pads
- —
- Mount
- —