Components
81 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
LTC1044
Regulator_SwitchedCapacitor
Switched Capacitor Voltage Converter, 1.5V to 9V supply operation, 200uA Max No Load Supply Current at 5V, DIP-8/TO-99
- Pins
- 8
- Pads
- —
- Mount
- —
74469
74xx
8-bit synchronous up/down counter, parallel load and hold capability (obsolete)
- Pins
- 24
- Pads
- —
- Mount
- —
74HC165
74xx
Shift Register, 8-bit, Parallel Load
- Pins
- 16
- Pads
- —
- Mount
- —
74LS165
74xx
Shift Register 8-bit, parallel load
- Pins
- 16
- Pads
- —
- Mount
- —
74LS166
74xx
Shift Register 8-bit, parallel load
- Pins
- 16
- Pads
- —
- Mount
- —
LM8261
Amplifier_Operational
Single Opamp, Rail-to-Rail Input/Output, Unlimited Capacitive Load Drive, +53mA/-75mA Output Current, 2.5-30V, 350uV offset, 12MHz GBW, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
OPA2994xD
Amplifier_Operational
Dual Opamp, Rail-to-Rail Input/Output, Unlimited Capacitive Load Drive, 125mA Output Current, 2-32V, 350uV offset, 24MHz GBW, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
HX711
Analog_ADC
24-bit Analog-to-Digital Converter (ADC) for Weight Scales, SOIC-16 (SOP-16)
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
MAX626xSA
Driver_FET
Dual Power MOSFET Driver, 4.5..18V supply, IPK = 2A, 20ns rise / fall times (1 nF load), TTL/CMOS compatible inputs, inverting drivers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX627xSA
Driver_FET
Dual Power MOSFET Driver, 4.5..18V supply, IPK = 2A, 20ns rise / fall times (1 nF load), TTL/CMOS compatible inputs, non-inverting drivers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX628xSA
Driver_FET
Dual Power MOSFET Driver, 4.5..18V supply, IPK = 2A, 20ns rise / fall times (1 nF load), TTL/CMOS compatible inputs, complementary drivers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MC3x152
Driver_FET
Dual High Speed MOSFET Driver, 6.1..18V supply voltage, 1.5A peak output current, 15ns rise / fall times (1 nF load), DIP-8 / SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MCP1662-xOT
Driver_LED
Step-Up LED Driver w/ UVLO and Open Load Protection, 500kHz, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MIC23158
gekkio-Gekkio_Regulator_Switching
3 MHz PWM Dual 2A Buck Regulator with HyperLight Load and Power Good, QFN-20
- Pins
- 21
- Pads
- —
- Mount
- —
MIC23159
gekkio-Gekkio_Regulator_Switching
3 MHz PWM Dual 2A Buck Regulator with HyperLight Load and Power Good, Auto-Discharge, QFN-20
- Pins
- 21
- Pads
- —
- Mount
- —
MIC23250-AAYMT
gekkio-Gekkio_Regulator_Switching
4 MHz Dual 400 mA Synchronous Buck Regulator with Hyperlight Load™, DFN-12
- Pins
- 13
- Pads
- —
- Mount
- —
SN65HVD255D
Interface_CAN_LIN
CAN Bus Transceiver with Fast Loop Times for Highly Loaded Networks, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SN65HVD256D
Interface_CAN_LIN
CAN Bus Transceiver with Fast Loop Times for Highly Loaded Networks, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
SN65HVD257D
Interface_CAN_LIN
CAN Bus Transceiver with Fast Loop Times for Highly Loaded Networks, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX3284E
Interface_UART
±15kV ESD-Protected 52Mbps, 3V to 5.5V RS-485/RS-422 True Fail-Safe Receivers, SOT23
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
ST485E
Interface_UART
Half duplex RS-485/RS-422, 5 Mbps, ±15kV ESD, 5V supply, 256 bus load, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
TPS25810RVC
Interface_USB
USB Type-C DFP Controller, integrated Power Switch, Load Detection, WQFN-20 (Texas RVC0020A)
- Pins
- 21
- Pads
- 21
- SMD
- 3.9×4.9
AP22802AW5-7
kiml-00-kiml-power-management
IC PWR SWITCH P-CHAN 1:1 SOT25, Power Switch/Driver 1:1 P-Channel 2A SOT-25
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TPS27081ADDCR
kiml-00-kiml-power-management
1.2-V to 8-V, 3-A PFET High-Side Load Switch With Level Shift and Adjustable Slew Rate Control
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4