10 components matching “plated”

Memory_RAM

64Mb Synchronous DRAM, 1 Mb x 16 b x 4 Banks, Cu leadframe plated with matte Sn, TSOP-II-54

Pins

54

Pads

54

SMD

13.5×22.7

Memory_RAM

64Mb Synchronous DRAM, 1 Mb x 16 b x 4 Banks, Alloy42 leadframe plated with matte Sn, TSOP-II-54

Pins

54

Pads

54

SMD

13.5×22.7

Connector_Audio

M Series, 6.35mm (1/4in) stereo jack, switched, full threaded nose, straight PCB pins, gold plated contacts

Pins

6

Pads

6

THT

33.9×20.2

Connector_Audio

Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose, sleeve contact/front panel connection

Pins

6

Pads

6

THT

34.2×16.8

Connector_Audio

Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose

Pins

6

Pads

6

THT

34.2×16.8

Connector_Audio

Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, half threaded nose

Pins

6

Pads

6

THT

34.2×16.8

Connector_Audio

Slim Jacks, 6.35mm (1/4in) stereo jack, metal nose, gold plated contacts, efficient chassis ground connection, T+R+S normalling contact

Pins

6

Pads

6

THT

34.0×16.8

jlcpcb-JLCPCB-Manufacturing

1. Two or three tooling holes should be added on the PCB, they should be placed in opposite corners of the PCB and as far apart from one another as practical. 2. Tooling holes should be 1.152mm(45.4mil) round non-plated holes with 0.148mm solder mask expansion. 3. Tooling holes are only required for PCB assembly orders. 4. Please try to add tooling holes on empty space and keep them away from traces. If there is no enough room, you can add them to the copper area.

Pins

—

Pads

—

Mount

—

kiml-00-kiml-connector-card

Micro SD Card Socket -40℃~+90℃ 1.85mm Gold plating Deck MicroSD card (TF card) High Conductivity Copper

Pins

10

Pads

—

Mount

—

kiml-00-kiml-testpoints

White PC Test Point, Miniature Phosphor Bronze Silver Plating Through Hole Mounting Type

Pins

1

Pads

—

Mount

—