Reference layout
Hole Placement Diagram
Rensselaer-Spaceflight-Society-Rocket-Engine-board2-Rocket-Engine-layout
Loading the viewer…
Rensselaer-Spaceflight-Society-Rocket-Engine-board2-Rocket-Engine-layout
The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).
60Placed parts
120Nets
2Copper layers
182.78 × 143.2 mmBoard size
yesRouted
KiCad 8File format
Bill of materials
59 distinct parts
28 resolve to something in the catalog — click through to the footprint.
| Ref | Value | Footprint | Qty |
|---|---|---|---|
| 12V_Power1 | 12V Power | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | |
| 12V_Power2 | 12V Aux Power | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | |
| A1 | Arduino_Mega2560_R3_Shield | Arduino:Arduino_Mega2560_R3_Shield | |
| COMMS_GND1 | GND | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | |
| D1 | LED | LED_THT:LED_D5.0mm | |
| D2 | LED | LED_THT:LED_D5.0mm | |
| D3 | LED | LED_THT:LED_D5.0mm | |
| D4 | D | Diode_THT:D_A-405_P7.62mm_Horizontal | |
| DF1 | LED | LED_THT:LED_D5.0mm | |
| D_FP1 | LED | LED_THT:LED_D5.0mm | |
| D_IGN1 | LED | LED_THT:LED_D5.0mm | |
| D_N1 | LED | LED_THT:LED_D5.0mm | |
| D_OXY1 | LED | LED_THT:LED_D5.0mm | |
| D_SHUT1 | LED | LED_THT:LED_D5.0mm | |
| HX711_Board1 | ~ | Sensors:HX711 | |
| J_Fuel1 | Fuel | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | |
| J_Ign1 | Igniter | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | |
| J_N1 | Nitrogen Valve | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | |
| J_Oxy1 | Oxidizer | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | |
| J_Pres1 | Fuel Pressuization | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | |
| J_Shut1 | Shutdown Valve | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | |
| Load_Cell1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | |
| Load_Cell2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | |
| Lower Left | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | |
| Lower Right | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | |
| P_Fuel_Feed1 | Pressure Transducer | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | |
| P_Fuel_Line1 | Pressure Transducer | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | |
| P_Fuel_Tank1 | Pressure Transducer | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | |
| P_Oxidizer_Line1 | Pressure Transducer | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | |
| P_Oxidizer_Tank1 | Pressure Transducer | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | |
| P_Unused1 | Pressure Transducer | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | |
| R1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | |
| R7 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | |
| R8 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | |
| R9 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | |
| REF** | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | |
| RESET1 | Reset | Button_Switch_THT:SW_PUSH_6mm | |
| RESET_ENABLE1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | |
| RF1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | |
| RX1 | RX_MAX485 | Communications:RS485_Transceiver |
Show the other 19
| R_FP1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | |
| R_IGN1 | R200 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | |
| R_IGN2 | 10R 10W | Resistor_THT:R_Axial_Power_L50.0mm_W9.0mm_P55.88mm | |
| R_N1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | |
| R_OXY1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | |
| R_SHUT1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | |
| Relay_F1 | ~ | ValveControl:Relay | |
| Relay_Fuel_Pres1 | ~ | ValveControl:Relay | |
| Relay_Ign1 | ~ | ValveControl:Relay | |
| Relay_N1 | ~ | ValveControl:Relay | |
| Relay_Oxy1 | ~ | ValveControl:Relay | |
| Relay_Shutdown1 | ~ | ValveControl:Relay | |
| TX1 | TX_MAX485 | Communications:RS485_Transceiver | |
| Thermocouple1 | ~ | Sensors:AD8495 | |
| Thermocouple2 | ~ | Sensors:AD8495 | |
| Thermocouple3 | ~ | Sensors:AD8495 | |
| Thermocouple4 | ~ | Sensors:AD8495 | |
| Upper Left | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | |
| Upper Right | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm |
Provenance
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.